Diablo Light Question

[chris2005]

Hi All

I have just got a Diablo light and cas 3+ programmer ,
I have loaded the latest 1.49 file and i am clearing conax channels but i am not sure exactly what i should be able to see,

I have an echostar 3600 receiver with a 2m dish ,

Can someone tell me do i need other cams to get more channels or should this do all,

I am trying to get tv1000 but i am having no luck.#

Many thanks

Chris.

[.: JaCkPoT :.]

Where are you? Massive dish... Do you have a actutator and 2 vbox? Or is it a stationary dish? You should get digitalb 16e, conax 1w, and some others alongside digitv.

[chris2005]

Hi sadiq

I am in Northern ireland,The dish used to be stationary but we converted it to motorised and put on a new lnb,
We picked it up cheap one day while working at a pub.

We are getting digitalb on 16e as we have the supersports card.

I would like to get as much stuff as possible on my diablo light just not sure what i should be looking for.


Cheers chris

[.: JaCkPoT :.]

goto 1west.. they are best for sports and documentaries...

[benny/9]

Hi sadiq

I am in Northern ireland,The dish used to be stationary but we converted it to motorised and put on a new lnb,
We picked it up cheap one day while working at a pub.

We are getting digitalb on 16e as we have the supersports card.

I would like to get as much stuff as possible on my diablo light just not sure what i should be looking for.


Cheers chris

************************************************** ******
from your possition with a 1mtr dish you should get thor 1w ok
and the diablo opens lots of chns on this sat, both on canal+ nordic
and digi-tv you will open about 400 chns, the cam also opens chns on
8w, 5e, 9e,and 16e being the main satellites and you dont need the supersports card the cam opens supersports channels alog with all the
digialb chns except the HD chns on digialb these are only open on there dedicated receiver, if you had a HD satellite receiver there are lots of HD
channels and chns on astra 3@ 23.5e that only open with a hd receiver

[chris2005]

Hi Benny

Thanks for the reply

I cant get supersports unless i have the card in when ever i take it out all the supersports go off.

I am using file 1.49 with new key files,
Echostar 3600 receiver

Are you receiving these at the min

Cheers chris

[.: JaCkPoT :.]

Leave it on the supersport channels with the cam in for a few mins... That should sort it...

[ferretuk]

firmware 1.51 all thor open all both nagra and conax all bar three sexveiw channels on hotbird and ive not played with sat for 4 years now and thors gone down hill kiosk gone wtf tps gone multivision i can feel an nds hack attack as its the direction the providers are headed

[benny/9]

firmware 1.51 all thor open all both nagra and conax all bar three sexveiw channels on hotbird and ive not played with sat for 4 years now and thors gone down hill kiosk gone wtf tps gone multivision i can feel an nds hack attack as its the direction the providers are headed

************************************************** *********
most of the channels on astra 19e and hotbird 13e
have now gone mate, tps moved to astra 19e and changed
encryption and multivision shut down polsat on hotbird 13e
also in nagra 3 as is premiere on astra 19e and i dont think
we will see these for a long time now for the diablo the best sats
are 16e.9e.1w.8w most chns on 16e and 1w

[chris2005]

Hi Benny

Thanks for all the info on channels,

Could you please give me a bit of advise on a receiver .
My dad has gave me his old channel master 1.2 m dish wish an 18" 36v actuator.

I want to buy a decent receiver to drive the actuator with HD and able to use cams but i am not sure what to go for( i have been looking at some Q boxes)

My dad has an echostar 3600 that used to drve the dish.

Thanks chris

[benny/9]

Hi Benny

Thanks for all the info on channels,

Could you please give me a bit of advise on a receiver .
My dad has gave me his old channel master 1.2 m dish wish an 18" 36v actuator.

I want to buy a decent receiver to drive the actuator with HD and able to use cams but i am not sure what to go for( i have been looking at some Q boxes)

My dad has an echostar 3600 that used to drve the dish.

Thanks chris

************************************************** *
hi m8,
i use a 1.2 chn master dish on a 36v superjack motor
and a v-box to convert a diseqc motor to drive a 36v motor
most new receivers are now only diseqc. as for receivers
everyone has different views as to whats the best, i use a
tm 6900 HD receiver and the quality is first class, with receivers
a lot depends on if your just after as much tv as possible with as
little programming as possible, if so the technomate fits the bill
or you could look at the clarke-tech 5000 HD combo same spec
as the tm 6900 but it's more stylish and a slimmer receiver
if your good with a computer and networking then a dreambox is
the best for c/s etc: but no good for the diablo cam there's no
cam slot on the db 8ooHD and there new db 8000 HD has a very
large price tag and i dont know if the qbox has a cam slot as it does
exactly the same as the diablo cam for channels

[chris2005]

Hi benny

I am o.k with computers and dont mind programming the diablo cam.
Can the dreambox get all the channels a diablo cam can get or would it be best going for the technomate if so what model would you recommend.

There is a few echostars 3600 on ebay at the min are they any good or are they out dated.

Cheers

chris

[.: JaCkPoT :.]

A dreambox will get you different amounts depending on how many people and who you share with.. But often with cs you will suffer lag... Technomates are only good now for card and cams...

[benny/9]

Hi benny

I am o.k with computers and dont mind programming the diablo cam.
Can the dreambox get all the channels a diablo cam can get or would it be best going for the technomate if so what model would you recommend.

There is a few echostars 3600 on ebay at the min are they any good or are they out dated.

Cheers

chris

************************************************** *****
hi chris,
there are many things changing at the moment and encryptions are changing and there are many views as to which way to go if you can get in a cardshare you can get more channels to view but you need a official sub card to share before you can join the group
and this can be expensive if you get a new box card etc,and you need the receiver connected to the computer at all times with a ethernet cable and all the set up it takes to use this method, it's a steap learning curve so if this is not for you then go for a receiver that has cam and card slots and use the cam, now the echostar receivers these are old receivers now
i had the 3600ip years ago and i dont know if they work with a diablo cam i had lots of problems with it when useing the dragon/t-rex cams and had
to use modified files before the box would read the cam. and now nearly all are diseqc motor feature only. i would go for one of these and use a v-box they are cheap to buy i paid ?39 for mine.plus if you have a HD tv then i
would get a HD receiver to get the best of whats available there are many more features on the new receivers so dont limit yourself with a old model. the choice of receiver is what ever you like but i have
had years of good service from technomate's they are good quality and very easy to setup etc: i'm sure other will give you there views on this subject

[chris2005]

Hi Benny

I would like to get the best kit when i am buying and wouldnt mind getting a subscription card if i could get a lot of channels by sharing.

what kind of box would i need for this and would it be easy to join a club and what other equip will i need.

This sounds like the best way to go and i would be very gratefull if you could advise me .

Thanks

chris.