Satlink WS-6908 Digital Satellite Finder

[gracieboo]

Hi there guys anyone recommend the best place to get one of these satlink 6906 ? Ive seen them on fleabay from ?68.50 and was just looking to know if anyone has bought off fleabay from china and has the meter been ok.? Or should i avoid and buy from the uk with uk plug etc. Any thoughts greatly appreciated.

[bugsy1]

hey guys im new to this site but not a newbie at all I have a satlink ws-6922 and need either a better channel editor tool or a satellite list for atlantic and north american satellites

Thanks Bugsy

[blueflash234]

if you go to you tube there are plenty how do's for this sat meter

[pedro2000uk]

We got some of these cheap meters from China in to test a while back, they looked very handy, however- when we tested them against pro meters they weren't calibrated properly so in certain situations they'd show a lower quality reading for what was a better reading on a pro meter like a Rover, 'something' was getting overloaded in them... you could partly correct it with an in line attenuator but that didn't prove too reliable- not easy to know what dB to drop. Not sure if all the chip sets are the same - they look like someone's shrunk the old Silvercrest/ Comag receivers circuits-not a bad idea if they'd calibrated them properly & added some better measures, but not unreliable readings.

The tv screens are handy though - very visible in sunlight plus some software have got disecq 1.2 goto reference/ zero & step 1.. works well if you are setting up diseqc 1.2/ 36v etc.

[yaramaz1977]

who is allready lid this forum Software & Manuals - Satlink - Support - Forum
i want download this firmware everytime but i have problem who can download en upload this link for me
already tanks Firmwareupdate 27.8.2012 WS-6908 V2.3 DiSEqC 1.1 / 1-16 LNB

[marios858]

WS-6908

I Found Today this post here my friend , i dont know if is working , i have 6906 model , i download it for a friend of my.

h**p://www.sat-dreambox.com/f4/ei-o-6158/index2.html#post23191

who is allready lid this forum Software & Manuals - Satlink - Support - Forum
i want download this firmware everytime but i have problem who can download en upload this link for me
already tanks Firmwareupdate 27.8.2012 WS-6908 V2.3 DiSEqC 1.1 / 1-16 LNB

[rwab609]

Guys,
I have the 6908 and initially it was great. Default to 28.2, move the dish and Walla. However, something strange has taken place. Linking to a set dish on 28.2 the WS shows no signal or quality. Select 23.whatever and it is wall to wall but actually tuned into 28.2. How strange is that. My real question is, how do I update it via a computer. I have the disc with tools etc thereon but do not have a RAW translater on my computer. I am quite slow at computer knowledge but think a RAW file is a compressed file. What do I have to do to open the tools on the disc and update my 6908? Does anyone know why it has decided to identify 28 when using the 23 sat. Bottom line is I have a motor home and have the device to tune the dish. I can still do that using 23 but it would be much easier using what I need, ie 28.2 for Astra 1N
Your comments to a newby would be appreciated.
Art

[aharabi]

hi guys ! I have a good news for you :
satlink 6908 firmware has been upgraded to v2.4 . previous version was 2.3
here's the link for it .
Software & Anleitungen - Satlink - Support - Forum

But there is a problem for it . I registered in this site but I couldn't download it . can any one help me ?
thanks before .

[buckielugger]

Satlink 6908

I have just bought a satlink 6908 and despite the instructions that came with it I aint got a clue as to how to get it to work. I have tried following some instructions on youtube but to no avail. I have Sky all working and I have installed a second dish to feed a freesat receiver in the spare room. All I want to do is align the second dish properly to get a signal. Can some of you more experienced members explain in simple terms what I need to do with the 6908 to get the job done.

Thanks in advance, and apologies if this has been covered elsewhere on the forum.

Cheers

BL

[magician58828]

I bought one, and thought it was rubbish. The response was terrible. I put a cheap sat finder in series with it, and it showed how bad it was. I tried it on a twin LNB with the already aligned motorised dish, and compared it the box. It even showed 40 precent when I moved the dish off, and the box showed no signal. I sent it back to china, which cost ?15, but I got my money back. I have now a FS1 meter and the response is brilliant. Setup a motorised dish within 15 mins.

I have to agree with you this is a piece of junk You can't program it correctly You got to the site for help and the company wants your complete life history. I would stay from this junker if I were you I am still trying to get my money back but the dealer refuses to comply.

[Jayja]

just received 6906 from china ... have a firmware problem ... china want it returned but before i do can some one send me a complete dumpfile from theres so i can try as i cannot find original firmware any where and think it might sort problem ... thanks