Blade 7000s - 9991 Not Working

[fylton03]

here is the latest patched firmware

[icankona]

Thanks

Thanks, need the file... Hope this isn't a breach of etiquette.

[bfcwayne123]

Ccam

Can anyone help me to do this on my blade box

menu network setup password 3313 or 0000 cccam client setup, manage config file, then when box comes up press ok on the top line. now u can see ur old details press ok to untick that line now press blue button on remote to add ur new line..change protocol from ccam to newcamd and input the above details with the remote.. the dot is on number 1 and the - is on the 0 key. when done press yellow to take u bk to ur account screen, when u see ur new line press ok to tick it at the end then exit to save reboot ur box and your done..


if u can not see cccam client in the network setup then go bk to the world just press left on remote. now press 6666 and u should see the list extend now cccam will be there..

Someone smashed my suppliers server so need to do this to get my box back online,
Any help would be great thanks

[bfcwayne123]

menu network setup password 3313 or 0000 cccam client setup, manage config file, then when box comes up press ok on the top line. now u can see ur old details press ok to untick that line now press blue button on remote to add ur new line..change protocol from ccam to newcamd and input the above details with the remote.. the dot is on number 1 and the - is on the 0 key. when done press yellow to take u bk to ur account screen, when u see ur new line press ok to tick it at the end then exit to save reboot ur box and your done..


if u can not see cccam client in the network setup then go bk to the world just press left on remote. now press 6666 and u should see the list extend now cccam will be there..

[ramjet]

do what ? cannot read it

[bfcwayne123]

Sorry, I copied and pasted it from an email

[ramjet]

means nothing to me

9991 is the pin code to get the extras menu on a blade bm7000s, as per the thread title

[bfcwayne123]

The instructions are for an Openbox but need to do something similar to my blade box to get it back working as my supplier had his server smashed and has now put me on a new server
How do I access the 9991 menu

[ramjet]

just press 9991 whilst on any channel

[bfcwayne123]

Thanks for that, I can now access the menu but cant change anything as that is P.I.N protected too, is it the same number 9991 or will my provider have inputted their own

[ramjet]

Thanks for that, I can now access the menu but cant change anything as that is P.I.N protected too, is it the same number 9991 or will my provider have inputted their own

good question , could be either

[bfcwayne123]

Thanks, I am now in the menu, 9991 worked

[tubs]

What is the pin no as my is also pin lock

[dodgy dell]

What is the pin no as my is also pin lock

try 9991 or 0000 on any channel, or if you have changed it try that number.

[allli]

learning to fly flashed bm7000s may 14 86.stb

total noobgot 9991 menu although dont know what to do with it?,u tube vids show but dont load&sat keeps "moving channels to astra"????,,starting to think i should bottle it & go back to origina firmware,bet you experts hate us,need a guide i think ,thankyou for your patience