hi i have a Panasonic viera HD tv i have connected my blade to it and it works fine apart from the HD channels and Sky1 which don't have sound but the picture quality is fine. Does anyone know how to sort it out? all the other channels that aint HD are fine.
-
Hillsborough 15th of April 198996
Never Forgotten
You'll Never Walk Alone
JFT96 - !!DONT BUY THE S*N!!
-
I have heard a few tvs had this problem, Im sure you need to mess about with the audio settings on the tv and it will sort the problem.
Cant think off the top of my head but mess about with them on the tv. -
i have the Panasonic viera m8 and had the same probs with the dream 800 i had to go into settings on the dreambox and trun on ac3 downmix to on to get sound workingplease press the little red THANKS tab
if I helped
if not press the green tab to tell me to f**Koff 
sometimes life will kick you around , but sooner or later , you realize you`re a warrior , and your stronger than anything life throws your way !!!!!!!!!!!!!!!!!!!!!!
Comment
-
yep,check audio settings and alter in sat box,i think it may default when powered off at back so will need redoing.Comment
-
The TV may not be able to handle Dolby over HDMI, there should be an audio setting on the TV to change.Comment
-
thanks guys for all the helpful info i will have a look and will get back to you cheers
Hillsborough 15th of April 198996
Never Forgotten
You'll Never Walk Alone
JFT96 - !!DONT BUY THE S*N!!
Comment
-
hi sorted the sound prob, lincs was right the tv setting was on HDmi sound but when i changed it to Dolbi it was all fine
Hillsborough 15th of April 198996
Never Forgotten
You'll Never Walk Alone
JFT96 - !!DONT BUY THE S*N!!
Comment
Comment