spiderbox 9000

[47vinny]

hi all

i decided to check my motorised system i found the pole was out by 1 degree left to right and 1 degree front to back, i realigned the pole which is now spot on i put my long/lat position back in box, i use a channel list that i have on usb stick but when i scan for sats nothing any ideas?


many thanks

vinny

[dick b]

if you have moved your pole you will need a complete realign,send the dish to your favorite sat and choose a channel that you know is active that you already had scanned in then press info twice on the H/set as this will keep the banner up and using the signal bars at the bottom move the whole motor/dish assembly L/R and the dish only up/down to get max signal.

[47vinny]

spiderbox

thanks dick b

i will try that tomorrow- is it best to use usals or diseqc?


vinny

[yasminandrio]

thanks dick b

i will try that tomorrow- is it best to use usals or diseqc?


vinny

I find it best with usals, so much easier!!