Motorised dish problems

[ron007]

OK first things first i am using an openbox s10/with a 98cm motorised dish.
I set my dish up great last week all running great using usals i was getting 28.2 fine and 0.8 west ok as well as a few others.I downloaded a bouquet from here for 28.2 reset box to factory settings and uploaded new bouquet set up my long/lat again and set all satellites to usals.Now i can get 28.2 ok but i cant get all the other sat's i just tried getting 4.8 e and looking at the channels and what lynsat is telling me i have got the wrong satellite completely(looks like 26e).Will i have to line up my dish again.(Like an idiot i didnt mark true south).
I hope this makes sense fingers crossed its an easy fix cos its chucking it down and will have to wait till weekend if dish need realigning.Thanks
Ronnie

[mdt]

OK first things first i am using an openbox s10/with a 98cm motorised dish.
I set my dish up great last week all running great using usals i was getting 28.2 fine and 0.8 west ok as well as a few others.I downloaded a bouquet from here for 28.2 reset box to factory settings and uploaded new bouquet set up my long/lat again and set all satellites to usals.Now i can get 28.2 ok but i cant get all the other sat's i just tried getting 4.8 e and looking at the channels and what lynsat is telling me i have got the wrong satellite completely(looks like 26e).Will i have to line up my dish again.(Like an idiot i didnt mark true south).
I hope this makes sense fingers crossed its an easy fix cos its chucking it down and will have to wait till weekend if dish need realigning.Thanks
Ronnie

changing a bouquet list cant make your dish need realigning. firstly send your motor to zero then do a factory reset and re-enter your lat/long again to see if it solves it. regards mdt

[ron007]

Thanks MDT. i will try that now Just gotta figure out how to send it to zero

[kaisar1]

On the motor there should buttons east and west. Or try resetting through receiver

Sent from my HTC Desire using Tapatalk

[bj1]

push east and west buttons in together at the same time for five seconds resets dish to zero on most motors

[maca]

There should be a small reset button on the motor which will send it back to 0..

[mdt]

Thanks MDT. i will try that now Just gotta figure out how to send it to zero

does the openbox not have a go-to-zero function in the menu,s? (i cant remember) regards mdt

[ron007]

Quick update guy's.Thanks for all the replies .
I went to antenae set up and motor options i sent motor to reference point it just stayed on screen for about 10 mins in the end i just hit stop.All seems ok now though so ithink it was just a case of resending the motor to zero.I will get the ladders out later on and just double check everything.Again thanks for replies everyone