are motor arms any good with dreambox

[daithi]

can ya use these motor armas with a dreambox 500v8 or 518
ya can get them chep enough and are they hard to setup Motor Arms Dish Positioning Equipment - Vanjak Rigging Supplies

[abr]

i use this type of actuator to move my dish 1.2 CM
i have a dreambox dm800
but 1 important thing you should know is this type of arm is 36 volts so you will need something like a V-Box 2
which converts the disq signal from the dreambox to 36V
or you could do what i do and use a dedicated dish positioner. i use a pace msp200
these type of actuators are mostly used for large dishes
and the setting up is not too difficult

[daithi]

i use this type of actuator to move my dish 1.2 CM
i have a dreambox dm800
but 1 important thing you should know is this type of arm is 36 volts so you will need something like a V-Box 2
which converts the disq signal from the dreambox to 36V
or you could do what i do and use a dedicated dish positioner. i use a pace msp200
these type of actuators are mostly used for large dishes
and the setting up is not too difficult

i might just stick with a motor so
by the time i buy those things ya mention it will probably work out around the same price
and my dish wont be that big 1m at the most