guidandce on motorised dish

[pspmixer]

iam looking at getting a motorished dish between 90-110cm as i want to get all 3pm kick offs
which one is best and where can get one
is there any easy tuts to setting it up right
also i was wondering if i installed this instead on my current dish will me other box work on a different sat e.g if one box is connected to 28.2 and the other is on 14.5

[Manic01]

TD88 or TD110 Dish
Dark motor
Inverto black lnb
T&K Brackets
RG6/CT100 cable.
Whats on 14.5e
No the dish if motorised will allow only the 1 sat.
If fixed you could have multi lnb for certain sats.

[Manic01]

There are tuts in stickies.

[ramjet]

leave the current one on 28.2e and just get the kit manic01 listed , it can be done diy but its not for the faint hearted and is easier if you have done them before, also check your walls using dishpointer to ensure you have a good south facing wall and no obstructions

14.5 means nothing to me , and probably not to anyone else either

30w , 0.8w , 13e , 16e and 19.2e are popular ones

[mdt]

does nobody else not find the f-con,s on the dark motor rather awkward due to the way its made? i prefer stab motors and always have. id go with a gibby 1m dish above a triax if i had the choice. i also find the elevation ajustment method on the td dishes not the easiest and could cause a great deal of frustration for a newbie installer. my choice would be...


dm800
gibertini 1m
12 or 18 inch t+k
inverto lnb
rg6 or wf100



regards mdt

[pspmixer]

TD88 or TD110 Dish
Dark motor
Inverto black lnb
T&K Brackets
RG6/CT100 cable.
Whats on 14.5e
No the dish if motorised will allow only the 1 sat.
If fixed you could have multi lnb for certain sats.

is there any 1 that can get hold of all these and fit for me
as some other fourms have said it not easy to install

[digicon]

does nobody else not find the f-con,s on the dark motor rather awkward due to the way its made? i prefer stab motors and always have. id go with a gibby 1m dish above a triax if i had the choice. i also find the elevation ajustment method on the td dishes not the easiest and could cause a great deal of frustration for a newbie installer. my choice would be...


dm800
gibertini 1m
12 or 18 inch t+k
inverto lnb
rg6 or wf100



regards mdt

Have to agree with you there on the Darkmotor mdt but i am now a convert i always use to install the TM's (Moteck clones) but found the Darkmotor a lot more robust as well as quieter and seems to have a better ARC spread.

I stopped fixing the elevation bracket on the motor first and now attach the cables and then do the bracket far easier. LOL those Koreans must think we all have dinky slim fingers

[mugello]

Stab motor all the way,got one up and running still, after almost 20 years....not bullsh1tting.
Cheers,mugello