can u check these setting please

[mapex]

Trying to get my motorised running well but its not
moving as norm, moves on goto 0 and sat finder but
but move normal
How do these look...sure this was the same setting with
my 500hd

VUDO----vix image

[mdt]

are you using fixed+motorised? usals or dis 1.2??? on my duo i use.. simple,positioner,lat,long and thats it. regards mdt

[digicon]

Those settings are what i use for my 800se in the other room i have 28.2 as LNB2 with diseqc 1.0 AB and the rest are Diseqc 1.2 AA Use Usals for this sat on my second motorised dish, But i must stress thats going through a 2 way diseqc into a single tuner.

Seeing as you have the VU+ Duo then as MDT says you should have simple, Positioner, with your Lon and Lat details.

[nathan2007]

yeah take the advanced off u only use advanced if cant get it working with simple positioner

[mapex]

I tried the simple on tuner A with long/lat in press ok...
tuner b equal to tuner A...wont budge..

[mdt]

I tried the simple on tuner A with long/lat in press ok...
tuner b equal to tuner A...wont budge..

have you tried sending your dish to zero and then try and move it via usals?. when i first put my duo in it wouldnt budge untill i sent the dish to zero and then re-booted. regards mdt

[mapex]

Its not moving on the positioner settings tried that, it moves to 0 and moves in satfinder but not move in norm use...dunno...lights on im the motor.

[digicon]

Its not moving on the positioner settings tried that, it moves to 0 and moves in satfinder but not move in norm use...dunno...lights on im the motor.

I think you may have to get up to the motor send to '0' first and then do a hard reset on the motor itself this should cure it.