Blade 7000 Motorized Setup Options & Different Sats etc

[tonycrew]

Ok i'll try to ask all i need to know in 1 thread saves posting too many.

Right at present i have Blade 7000 on Sly CS.

I want to add a 1.1m Dish and Motor, Now Say i get 3 other CS for different Sats, how does that work, Can i have more than 1 set of CS details on the Blade..?

Are there any other Cams, Smart Cards that i can Program Myself and that are compatible, and will give me 3pm Footy...? (PM with details of this if needed.) I come from Cable from a couple of years ago so i know the basics of programming cards and Keys etc.

What Satellites should i be pointing at to get the above..?

I know the Blade supports motorized dish, but does it automatically control the motor when you choose a channel...?

Does anyone else here use the Blade with Motor and Multiple CS...?

Thanks for any help.

[potrobber]

I want to add a 1.1m Dish and Motor, Now Say i get 3 other CS for different Sats, how does that work, Can i have more than 1 set of CS details on the Blade..?

hi when you hit the 9991 and see connections you can enter up to 24 lines and leave them on then when you are on whichever sat you want it will use the line that clears for that sat

the rest you need to find out from someone else as i just use 28.2

setfiretorain has just set one up for himself on a motor setup and has a thread going try asking there aswell

[ramjet]

Ok i'll try to ask all i need to know in 1 thread saves posting too many.

Right at present i have Blade 7000 on Sly CS.

I want to add a 1.1m Dish and Motor, Now Say i get 3 other CS for different Sats, how does that work, Can i have more than 1 set of CS details on the Blade..?

Are there any other Cams, Smart Cards that i can Program Myself and that are compatible, and will give me 3pm Footy...? (PM with details of this if needed.) I come from Cable from a couple of years ago so i know the basics of programming cards and Keys etc.

What Satellites should i be pointing at to get the above..?

I know the Blade supports motorized dish, but does it automatically control the motor when you choose a channel...?

Does anyone else here use the Blade with Motor and Multiple CS...?

Thanks for any help.

the above answer tells you about the cs arrangements and how you can add multiple lines using 9991

although I have a blade , its on 28e as I use a spiderbox on my motor , but its the same principle , you set it up using diseqc v1.2 or usals , and choose a satellite and then a channel , and the motor is moved if necessary until its pointing correctly and the channel pops up , so its automatic once setup correctly

there is little to do with programming cards or cams these days , its a dying art form as most encryptions have beaten those methods , and you will find that the softcam and patches do the job of any programmable cards , so probably not required

there are cams like the trex and diablo but again you probably wont need them at all

most of the satellites and transponders and channels are listed on liveonsat.com , but it ranges from 42 east to 30 west , with about a dozen satellites being useful

the above details apply to almost any modern box , not just a blade

[alex123]

you can download the motorised channel list on blade online and as said if you want euro pay channels you need a line that will open up everything you add these lines or line onto the txt file and load to the box as normal then activate them all by 9991

[bj1]

Ok i'll try to ask all i need to know in 1 thread saves posting too many.

Right at present i have Blade 7000 on Sly CS.

I want to add a 1.1m Dish and Motor, Now Say i get 3 other CS for different Sats, how does that work, Can i have more than 1 set of CS details on the Blade..?

Are there any other Cams, Smart Cards that i can Program Myself and that are compatible, and will give me 3pm Footy...? (PM with details of this if needed.) I come from Cable from a couple of years ago so i know the basics of programming cards and Keys etc.



What Satellites should i be pointing at to get the above..?

I know the Blade supports motorized dish, but does it automatically control the motor when you choose a channel...?

Does anyone else here use the Blade with Motor and Multiple CS...?

Thanks for any help.

ask your current line provider to upgrade you to full european and just pay the extra and you will just use the
one line........BJ1