I put on a jade 3 pli image into my dm500 box and have a 90" dish set up im trying to get an SNR and AGC response without success.
at first i was getting around 70% agc no matter where the dish was pointed but no SNR.
Then i changed my LNB settings to
lnb 0
LOF/L 09750
LOF/H 10750
threshold 11750
discq mode v1.1
discq parameter B/A
discq repeats none
uncommited switch input 1
then i checked swap commands and saved it
now i have 0%/0%/0% on SNR AGC and BER
any help please much appreciated
also which transponder should i use
ps i live in North America
using this for galaxy 19 ku band
Elevation: 59.1?
Azimuth (true): 175.5?
Azimuth (mag.): 170.4? using Compass
LNB Skew: -4.0?
at first i was getting around 70% agc no matter where the dish was pointed but no SNR.
Then i changed my LNB settings to
lnb 0
LOF/L 09750
LOF/H 10750
threshold 11750
discq mode v1.1
discq parameter B/A
discq repeats none
uncommited switch input 1
then i checked swap commands and saved it
now i have 0%/0%/0% on SNR AGC and BER
any help please much appreciated
also which transponder should i use
ps i live in North America
using this for galaxy 19 ku band
Elevation: 59.1?
Azimuth (true): 175.5?
Azimuth (mag.): 170.4? using Compass
LNB Skew: -4.0?
Comment