hd channels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gary bailey
    Newbie
    • Jan 2009
    • 3

    #1

    hd channels

    hello there
    can anyone help me i have a hd box but can not tune in to hd channels do i need to change my lnb on my dish or is it something else any information would be gratefully accepted thanks
    gaz b
  • .: JaCkPoT :.
    Retired Sat TV Addict
    • Aug 2008
    • 5607

    #2
    How old is your lnb?
    I think all hd channels have a symbol rate of 30000 so make sure you have them transponders tuned in

    Read the Rules here; they apply to Everyone.

    ___________________
    In the good old days, I had
    DM800s HD
    Openbox S10
    TM500
    DM500s
    90cm FortecStar dish
    Maxx 110cm Dish
    Technomate 2300 Motors

    sigpic

    Comment

    • terry l
      Member
      • Nov 2008
      • 92

      #3
      What receiver have you got m8?..do you have a cam?.. have you set your transponder settings right..what H D channel's do you want to open?.. if you elaborate a little bit more i'm sure you'll get an answer.

      regard's
      terry.

      Comment

      • gary bailey
        Newbie
        • Jan 2009
        • 3

        #4
        hi there i have a topfield 700 hsci hd box when i type the transponder number in i am not getting a good enough signal to tune in to the hd channels so this is why i thought it could be my lnb my lnb is about a year old but is just a basic one so i was wondering if this could be the problem or do i need to realign my dish thanks
        gaz

        Comment

        • .: JaCkPoT :.
          Retired Sat TV Addict
          • Aug 2008
          • 5607

          #5
          If you still have your lnb box it will say hd ready or non hd..that could be the prob..

          Read the Rules here; they apply to Everyone.

          ___________________
          In the good old days, I had
          DM800s HD
          Openbox S10
          TM500
          DM500s
          90cm FortecStar dish
          Maxx 110cm Dish
          Technomate 2300 Motors

          sigpic

          Comment

          • spud
            Newbie
            • Nov 2008
            • 4

            #6
            lnbs are NOT standard and hd an lnb is an lnb most hd stb req a signal of 50 percent or more if you are not getting hd ch then realign dish to max change lnb most sat meters dont show you all transponders only hor hi hor low ver hi ver low try this first dish lnb then cable if no joy must be stb

            Comment

            Working...