no sat signal

[abertawe1]

hi all ive got a bit of a problem with my freesat it was working perfectly until a few weeeks ago when the box was saying no signal so i took the box to a relatives that was working fine tried a sattellite box from my fathers that also said no sat signal so i fitted a new lnb set the dish up with sat finder which says i have got the strongest signal but still says no signal on free sat box and sky box any iideas ?

[smirnoff_rules]

lm not sure about freesat but l think l remember u have to change to disc slightly , its not 100% to the same as sky .u might be looking at 19e ? l might be wrong here Aiming a dish at Astra 2.

[Shamonee]

Check the cable connection might need re doing

Sent from my GT-I9100 using Tapatalk

[nathan2007]

sounds 2 me like the tuners died in the box if it dont work on 2 dishes .............

[abertawe1]

ive tried both boxes in my fathers house and they are fine and replaced the lnb and i am getting a full signal on sat finder but no signal.

[dick b]

ive tried both boxes in my fathers house and they are fine and replaced the lnb and i am getting a full signal on sat finder but no signal.

if its a cheap satfinder it will only tell you your on a sat but not which,one has the dish moved from when it last worked?
forget the sat finder use the box its self to find the sat put it on a channel you know is working then slowly move the dish L/R til signal maxed then (if neccessary) move the dish up/down to max the signal again.If everthing has been moved since it last worked you may have to do both to get it back.

[seamouse]

freesat is the same as sky 28.2e and if dead on 2 dishs then box at fault

also try a box at your house if still dead after a new lnb, check wires

[Nutsandbolts]

if its a cheap satfinder it will only tell you your on a sat but not which,one has the dish moved from when it last worked?
forget the sat finder use the box its self to find the sat put it on a channel you know is working then slowly move the dish L/R til signal maxed then (if neccessary) move the dish up/down to max the signal again.If everthing has been moved since it last worked you may have to do both to get it back.

Totally agree, sat meters are a waste of time and money. You cant beat the good old fashioned way of finding satellites ie using your hands and eyes. You also learn a lot about satellites this way as well.

Regards