Cant access 9991 menu on blade 7000s - but i know its working??

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Server1
    Newbie
    • Sep 2012
    • 1
    #1

    Cant access 9991 menu on blade 7000s - but i know its working??

    Hello, I have a blade media 7000s flashed with the lastest firmware allowing the 9991 menu. I have inputted my details and it works.....however a few minutes after or perhaps after turning off the box the 9991 menu is no longer accessible...but i know its working since the channels are decrypted and working fine! however when i press 9991 nothing comes up.

    This is very strange....The only way to get back the 9991 menu is to do a factory reset. As I said i know its live since the channels are decrypted however you cannot access the menu until factory resetting it. Im using the latest firmware patched BM7000s May 14 2012 86x


    Thanks
    Tags: None
    • seamouse
      Senior Member
      • Nov 2008
      • 287
      #2
      as far as i read up, u have to factory it each time to add a line
      MY POSTS AND ANY PM`S ARE PURELY FOR EDUCATIONAL AND LEARNING PURPOSES

      I AM FULLY RESPONSIBLE FOR MY OWN POSTS, MY POSTS ARE NOT CONDONED, MODERATED OR AUTHORISED BY ANY MEMBER OF STAFF ON THIS SITE AND I TAKE FULL RESPONSIBILITY FOR ANY CONTENT CONTAINED IN MY POSTS OR LINKED TO EXTERNALLY.

        Comment

        • ramjet
          DK Veteran
          • Nov 2008
          • 2995
          #3
          Originally posted by seamouse
          as far as i read up, u have to factory it each time to add a line
          never been the case with any blade bm7000s that I have setup

          pressing 9991 when on any channel always brings up the hidden menu on a patched blade

            Comment

            • ramjet
              DK Veteran
              • Nov 2008
              • 2995
              #4
              Originally posted by Server1
              Hello, I have a blade media 7000s flashed with the lastest firmware allowing the 9991 menu. I have inputted my details and it works.....however a few minutes after or perhaps after turning off the box the 9991 menu is no longer accessible...but i know its working since the channels are decrypted and working fine! however when i press 9991 nothing comes up.

              This is very strange....The only way to get back the 9991 menu is to do a factory reset. As I said i know its live since the channels are decrypted however you cannot access the menu until factory resetting it. Im using the latest firmware patched

              BM7000s May 14 2012 86x


              Thanks
              the correct firmware is actually mar 14 2012 83x

              that later may 2012 one was a beta firmware I believe
              Last edited by ramjet; 7 October, 2012, 08:17.

                Comment

                • lac
                  Top Poster +
                  • Apr 2011
                  • 213
                  #5
                  Latest stable version for the Blade Media BM7000s - 14/05/12 - RECOMMENDED

                  From BM site.

                    Comment

                    • dodgy dell
                      Member
                      • Sep 2011
                      • 46
                      #6
                      Originally posted by lac
                      Latest stable version for the Blade Media BM7000s - 14/05/12 - RECOMMENDED

                      From BM site.
                      If its from the BM site it wont have the 9991 feature. Its as Ramjet says above.

                        Comment

                        • lac
                          Top Poster +
                          • Apr 2011
                          • 213
                          #7
                          Originally posted by dodgy dell
                          If its from the BM site it wont have the 9991 feature. Its as Ramjet says above.

                          New firmware BM7000s - May 14 2012 86x

                          Has 9991 menu

                          1.You Tube compatible... fixed.
                          2.Blade online ... updated.
                          3.Rare system... halt fixed.
                          4.Videoshare updated

                          thanks HiTeck
                          Last edited by lac; 9 October, 2012, 12:58.

                            Comment

                            Previous template Next
                            Working...