maxx1000 / protek 9600 / nanoXX

[baroni701]

Maxx1000

Does anybody know if this box can get any channels. I haven't used it in over a year due to server going down and mac filtering. I was able to test it on cs pay server but got fed up and ditched the box. I am thinking of trying to ressurect it or go for a Dreambox - any ideas?

[mdt]

Does anybody know if this box can get any channels. I haven't used it in over a year due to server going down and mac filtering. I was able to test it on cs pay server but got fed up and ditched the box. I am thinking of trying to ressurect it or go for a Dreambox - any ideas?

hi, you could try this as it does work sometimes. load the me-to-eu file the t70 then k46 and do a factory reset after each upload. let us know if it works, regards mdt

[jaydee]

Does anybody know if this box can get any channels. I haven't used it in over a year due to server going down and mac filtering. I was able to test it on cs pay server but got fed up and ditched the box. I am thinking of trying to ressurect it or go for a Dreambox - any ideas?

I have the PROTEK 9700ip receiver, I joined the NanoXX web site everything is in there to get you started. I receive channels from Astra, Hotbird, 16e,7e, 30w. Great box and plenty of Members to Help the biginners the likes of me.The box cost around ?230 + a Router.

[baroni701]

hi, you could try this as it does work sometimes. load the me-to-eu file the t70 then k46 and do a factory reset after each upload. let us know if it works, regards mdt

Cheers mdt, will give it a go tomorrow - heading for pub after work

[baroni701]

I have the PROTEK 9700ip receiver, I joined the NanoXX web site everything is in there to get you started. I receive channels from Astra, Hotbird, 16e,7e, 30w. Great box and plenty of Members to Help the biginners the likes of me.The box cost around ?230 + a Router.

I tried that site but was hit and miss for me - sometimes it worked sometimes didn't. Will try what mdt has suggested - cheers

[stopfordian]

Protek 9600ip. I have an id for the box but dont know where to get software 24e or 24t to use with the id. I have tried Nanox site but to no avail. Could anyone please help ?

[magmafee]

did someonje know if it is working for starex sr 2000

[sabena]

hi

if i use the software i can watch nailsat channels

[ALAN 1]

hi

if i use the software i can watch nailsat channels

Nilesat you can get only with ID, ask your dealer from which you bought box, around ?25 to buy.

[ennkay]

NEWCAMD on MAX1000

hi, you could try this as it does work sometimes. load the me-to-eu file the t70 then k46 and do a factory reset after each upload. let us know if it works, regards mdt

Hi mdt
I have Max1000 with Boris T3 running with a NEWCAMD paid server. Does the firmware listed in your post above include NEWCAMD?

[mdt]

Hi mdt
I have Max1000 with Boris T3 running with a NEWCAMD paid server. Does the firmware listed in your post above include NEWCAMD?

it does include it but it doesnt work very well. the dark forces dont seem to be concerned with the emulator functions and the newcamd function anymore allthough the protek 9700/9750 hi-def boxs run newcamd fine alongside the "gift" server. regards mdt

[ennkay]

it does include it but it doesnt work very well. the dark forces dont seem to be concerned with the emulator functions and the newcamd function anymore allthough the protek 9700/9750 hi-def boxs run newcamd fine alongside the "gift" server. regards mdt

I upgraded it and NEWCAMD does not seem to be working as you predicted. Also I am unable to get any scrambled channels through the "gift" server though my box did automatically connect to the server and download updates a few times. Did I miss any config steps? I have now gone from a running NEWCAMD box (albeit with an outdated and somewhat unstable firmware version) to nothing! Appreciate any tips to get this working.

[cactikid]

maybe an updated firmware needed so you can reconnect again.

[mdt]

I upgraded it and NEWCAMD does not seem to be working as you predicted. Also I am unable to get any scrambled channels through the "gift" server though my box did automatically connect to the server and download updates a few times. Did I miss any config steps? I have now gone from a running NEWCAMD box (albeit with an outdated and somewhat unstable firmware version) to nothing! Appreciate any tips to get this working.

this is the latest firmware/keyfile for the 9600ip. regards mdt

[galini]

Hi everybody,how do I load this last firmwares in the 9700HD IP ? Thank you.