Problems with motorised system

[rikksow]

I have a major problem. I have just had a motorised dish set up and all has been working fine on my alien 8900 HD in enigma 2. The problem i have on the motorised dish is i can't get 28e due to a large tree blocking the line of sight so i have a sky dish on another part of the house which picks up sky so i have diseqc'ed the two but i have to keep changing the settings to either positioner to use the motorised or disecq to use the sky. anyway to cut a long story short i thought i would try and configure it in spark and now i have lost everything on the motorised system in both spark and enigma. I am getting no signal on any satellite yet the motor is still moving. Does anyone know what the hell i have done and how to fix it. Surely if the motor is moving then there is nothing wrong with the dish or lnb??? any ideas

thanks in advance Rikk

[digicon]

I assume the positioner settings on the alien are your USALS settings have you checked to see if the settings have been wiped due to you changing from spark to E2, for future reference it is easier if using a diseqc switch to configure your satellite positions with Diseqc 1.2 and have 28.2 on Diseqc 1.0 with the switch this will save you keep swapping over all the time.