Need advice on setting up lmb t o 3 satellites

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andriusv
    Junior Member
    • Mar 2009
    • 23

    #1

    Need advice on setting up lmb t o 3 satellites

    Hi can someone tell me if I can get universal lmb holder which can be set to Astra 4.8 Hotbird 13 and Astra2 28.2. I am using TD110 dish.any advice is much appreciated.Thanks
  • ramjet
    DK Veteran
    • Nov 2008
    • 2995

    #2
    Originally posted by andriusv
    Hi can someone tell me if I can get universal lmb holder which can be set to Astra 4.8 Hotbird 13 and Astra2 28.2. I am using TD110 dish.any advice is much appreciated.Thanks
    you can buy the triax 4 lnb holder for your td110 dish, and move the individual lnb holders along the rack to where you need them to be

    add an lnb into each holder, and use a 4 way diseqc switch to switch between them

    Comment

    • andriusv
      Junior Member
      • Mar 2009
      • 23

      #3
      Thanks. I am looking on eBay they all are from 3 to 20 degrees. Do I still can get on astra 28.2e

      Comment

      • ramjet
        DK Veteran
        • Nov 2008
        • 2995

        #4
        Originally posted by andriusv
        Thanks. I am looking on eBay they all are from 3 to 20 degrees. Do I still can get on astra 28.2e
        it may do , or may not , the 5e is going to be a struggle but thats your fault for wanting such a wide spread , a motor would be a better bet

        Comment

        • digicon
          V.I.P. Member
          • Jul 2009
          • 8261

          #5
          You will get the 4.8? east European beam as this can be picked up on a standard 43cm dish but forget the Nordic beam on that kind of spread as ramjet so rightly states.

          you would have to make 13? east your centre with 4.8? & 28.2? as your offsets.

          Comment

          Working...