Eutelsat 3.1 E

[hkhksh]

Hi all need a little help with this sat am having problems finding any channels on it no TP's no nothing ! ive got all other sat's around it like 4.8 east Thor 0.8 etc but nothing on this, is anybody else picking anything up on it ???

Thanks

[dick b]

try 12.537 H 2.144 its a trial broadcast by tandberg in the clear and on now

you can also try these FTA channels
12.626H 2.962=test
12.671V 2.200=speda tv
11.594H 11.850=3x feeds
all broadcasting at the moment

[hkhksh]

Hi Dick am not picking anything up on that TP ive tried nudging west and east a little but still nothing my single on 4.0 east is 80% and 78% on thor what am i doing wrong ???

[ramjet]

seems ok on my motorised dish and getting all the feeds and channels listed by dickb

[dick b]

Hi Dick am not picking anything up on that TP ive tried nudging west and east a little but still nothing my single on 4.0 east is 80% and 78% on thor what am i doing wrong ???

their not the strongest signals but come in ok on a 1mt dish just south of the Humber on TM 6800 average Q readings are for 0.8W=86% 3.1E(only those listed TPs)=60% and 4.8E=84% and 67% for baltic channels,but these readings wont relate to your box as box meter readings are not that accurate it may be either your location/dish size or your dish elevation needs a tweek.
just done a check with a spiderbox on the same dish and 0.8W came in at 98% 3.1E at 36/56%
and 4.8E at 98%(60% for the baltic) but even at only 36%on 3.1E picture was ok.

[hkhksh]

Ok thanks for the help and info guys i think i will leave going on the roof for today , will let you know how i get on

once again Thanks

[hkhksh]

Hi guys ive tried my friends openbox s9 and it found all channels on 3.1e so were is my box going wrong ??

[ramjet]

Hi guys ive tried my friends openbox s9 and it found all channels on 3.1e so were is my box going wrong ??

maybe too many channels or too many transponders ?

working ok on my spiderbox 7000

[hkhksh]

when i use to have a openbox it would tell me (space full ) does a spiderbox do that by any chance ?

[ramjet]

not to my knowledge

[hkhksh]

Question :- How the hell do i delete TP & channels ?

[ramjet]

for unwanted channels , use the channel manager and use the remove option top right and select unwanted channels with the OK button , then blue button to remove (use the red button to test them)

for transponder removal, use manual scan and select the transponder, checking the green and blue bars, use yellow to delete unwanted ones

[hkhksh]

Ok thanks for the info am i ok to remove a load of feeds i have on there ??

[ramjet]

its your box, do as you please with it

[hkhksh]

I dont think the feeds work anymore do they ?