blade 7000 hd

[tomsta79]

hi every one .i have a blade 7000 hd box and the picture always jumps are frezzes what is this down to to many people sharing the one card.. are can it be down to other things.. ive changed wires from dish to box new lmb? if any one can help thanks

[ramjet]

try the oct 2012 or jan 2013 firmware

make sure your signal and quality levels are ok

after that, yes it can be the cs with various problems including what you said

[tomsta79]

ram could you send me link for the sub custem firmware my box has may 14 2012 86* thanks

[ramjet]

its lower down this page, about 19 threads lower, or try the search using the name blade

[tomsta79]

its lower down this page, about 19 threads lower, or try the search using the name blade

ram ive put jan 2013 firmware on but i dont no if its just me but channels seem to take longer to switch over from one to another..have you heard any one else with this problem. Let me no thanks

[ramjet]

use the search button and have a read of the problems for yourself ! (its just as easy for you to search as it is for me, but you are the one wanting to know the results)