cannot find thor 3/5 0.8 west

[mm009b]

This is the best way to check you have tracked the arc..goto 30w check your signal, then 1west check your signal then 42e and check your signal..if all Them are fine then your arc is perfect..but i think its your elevation which is wrong mate..goto one west and get on a ladder then play with the elevation of the dish slightly..but make sure you mark its current position first!

jackpot i started due south pole perfect plumb all ways (done with a laser ) i can get from 4.8 e to 28.2 east no problem
but cannot seem to get anything west i know everyone will say its elevation but i dont think so
i think courios123 is correct its image
if i start due south then wor to 28 east by rights i should be able to do the same west ie mirror the arc cheers for your inpute mate im going up ladder and looking out my miners light just in case thanks again mate cheers

[mm009b]

I quite like the Nabilosat image but had to give it up because I couldn't get 1W Thor to work properly or Digitv. I found that if I amended the transponder edit for 1W from 10 to 8 it would work for me but only on the Pli image. I also read that you could get this to work if you copied your satellite.xml file to the new image.

ok mate i sused it was it the symbol rate from 10000 to08000 if so i tried that and nothing am going to try pli now cheers mate will let you all know how i get on