satlink ws6906 tuning problem

[genzy01]

same problem blue lock still on and no signal, please help

after using satlink ws-6906.zip works again. thanks josepheid503

[rcleary99]

solved

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
[ATTACH]246250[/ATTACH]


Best regards, J.E

Hi just downloaded zip done the upgrade worked brilliant for my blue lock led staying on
thanks a million

[avn]

thanks

in the djpbox sat there are new things like key set and blind scan

anybody try it?

[Technophobic]

thanks

in the djpbox sat there are new things like key set and blind scan

anybody try it?

Yes I have had it on my meter for about an hour. Afraid I cannot enlighten you further, I am trying to figure out how to get the menus to use the whole screen. At present it makes things quite difficult to see.

I think I might need a magnifying lens add on.

[wba]

Hi dear,

i see you are handy with the firmware,
is there a way to get change the firmware so the Satlink will also check the normale TV signal here in Spain?
i have see it once by a handyman also changes some things, but i realy dont know what he has do with it.

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
[ATTACH]246250[/ATTACH]


Best regards, J.E

[triggerup]

I had exactly the same issue here, paid for an update from satlink themselves and my ws=6906 just had no signal, the blue lock light was permanently lit. I thought is was completely goosed. Your custom firmware has restored it back to working condition. Nice one josepheid503!

[peer1]

Please help me and me

Can not save the list of channels when you give the device resets.



I tried to do updates but I get this error.
burn flash error, error address:000000

SatLink6906

thank you.

error6906.jpg

[ajam90]

hi Guy.. Anybody know how to solve my NEW ws-6906 the problem detection for TP 12500 v 43200 Ku Band FTA in Chinasat 11 bad low signal not locking compare with ws-6933 within 2-3 minit fast locking.. Is it problem SYSTEM of must Upgrade FIRMWARE..?

I need for Help.. TQ Guys

[sikonauta]

thanks. i solved the problem whit your firmware.

[hhamme]

I have same issue and would like to try to solve with this update, but when I try to get the software from link, I keep getting this error from the site: satlink ws-6906.zip

Your submission could not be processed because a security token was invalid.

If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error.

I have made posts so should have access to download I think.

Any suggestion?

/Harald

[tkifle]

For everyone that is having the same problem, the solution is very simple. I did get a "custom" firmware for the machine and did perform an upgrade.

Now the machine is working perfectly, even better than the stock firmware.

This is the firmware + upgrade tool, hope it will help other people in the future. Also i will try to get the original firmware and also try to share it here.
[ATTACH]246250[/ATTACH]


Best regards, J.E

I can't download this... it's telling me to log in. I have already posted and should be able to download the attachments? Any ideas?