Amiko Mini HD need 8 digits password

[damiensk]

thanks for your help vorlon,
have now updated to what i believe is the latest version january 2015, 0a07oa00_1.6.54 emu.
couldnt see anything about a loader version on the site?

another thing is all my sly bouquets have now gone, do you know where i can d/l a file?

thanks again

[vorlon2257]

No mate can't help you there, only thing I can think off is to do a search on google to see if there are any on there.

[damiensk]

thanks anyway. will do a search

[mini]

I also have issue with the Amiko mini combo, unable to get past the password.
what firmware do i need as well as the upgrade tool. Also is it a 3.55mm (3 pole)jack needed?
I prefer dreamboxes, this is a favour for a friend.
All help is much appreciated, thank you

[mini]

Managed to sort it. Got loader from amiko and firmware from amiko website.
then as I didn't have a rs232 to 3.5mm cable, I had to solder the wires direct on to the female jack on the board and it worked.
If anyone has to do same then the wires to solder are: the tip is TX then Ground, RX and then ground.
If anyone needs to make or order a cable then you will need rs232 and a 3.5mm (4 pole) jack.

[ruk4]

hi
PLZ CAN SOMEONE HELP ME OUT
I HAVE AMIKO HD 8150.....
1] I NEED A SOFTWARE TO UPGRADE BY USB
2]CONDITIONAL ACCESS I CAN GET IN NET CLIENT CONFIG EACH TIME I TRY ITS ASKING FOR IN PUT PASSWORD --------
PLZ HELP ME THIS IS NEW TO ME
THANKS

[P&D]

Everything you need is here.....http://amikoreceiver.com/amiko-hd8150/

P.s........turn your caps off........

[ruk4]

Thankyou
Sorry to trouble you but don't know what link to download. ....
Can you tell me which link do I downloaded and would that remove the password from net Client config.

Thanks☺