s*y boxkey converting

[jellybee007]

hi,

is there someone they can tell me how i need to convert the boxkey of my receiver to putting them in newcs or other softcam.

i hope someone they can help me for a solution,

many thanks in advance,
jellybee00

[C64]

Use CCcam mate, no farting about, it's plug and play.

[satman]

hi,

is there someone they can tell me how i need to convert the boxkey of my receiver to putting them in newcs or other softcam.

i hope someone they can help me for a solution,

many thanks in advance,
jellybee00

Get from sly box mate,, you can get serial number,, and card number from the menus...

[SpiderPig]

Now we read the data of our boxkey no in the menu of the Skybox.
We enter the Menu and enter the following number
(via the remote control): 4-6-1.
That will take you to the Menu page that interests us.
We need the serial box id number of the receiver, which can be found in the third line down - it should be a 10 figure number.
We then remove the zeros and we convert it to hex format (with the Windows Calculator**), to obtain the right values.
We put zeros in front of the the hex number, so we then have an 8 figures number -> this will give you your boxid no.

The same thing for the smartcard serial number: which can be found on your smartcard we take the numbers indicated in the last line (9 figures to you) excluding the last one (becomes an 8 figures one) and we convert it to hex.
After we add the zeros, so the 8 figures number is your serial number.

An example: Seriale 0012345678, Smart card 456975113:
12345678 converted to hex BC614E --> BOXID: 00BC614E
45697511 converted to hex 2B949E7 --> SERIAL: 02B949E7

[ghostswife]

much more fun to do in my head may i say