If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Right now they open 13e channels ie jsc/art/bis/mct. New files to follow. Watch out for fakes that can not be prog. satfooldeals and alsat have legit cards available as of 21 jan I believe.
50quid is way expensive for what it opens!!..it opens ~~~~ all..then you have to buy a programmer as well..total waste of money if you ask me.. a tenner more gets u a dm500 clone or for 100 a protek that opens 15 times more...
50quid is way expensive for what it opens!!..it opens ~~~~ all..then you have to buy a programmer as well..total waste of money if you ask me.. a tenner more gets u a dm500 clone or for 100 a protek that opens 15 times more...
It is just the beginning!!
it will open more in the near future!!!
sigpic
Technomate 6800 HD/DM800 HD PVR
1.1 metre Dish
Darkmotor
Right now they open 13e channels ie jsc/art/bis/mct. New files to follow. Watch out for fakes that can not be prog. satfooldeals and alsat have legit cards available as of 21 jan I believe.
as I dont have broadband these cards are of great interest to me and I would be grateful if you could explain how to use them ie: will they work in my tm multicrypt card reader or do you need a special cam,are the 13E channels pre programmed? what sort of programmer would I need(and how to use it).etc.,etc.,
as you can see up to now I"ve kept it very simple and was quite happy with what I got from patching.
regards
dick b
they come blank m8...then you load the needed files (when available) onto the card using a programmer...the cas 3 plus used for the diablo cam will do the trick...think these are about 50quid ish....then just update with a new file as and when needed...i would imagine a multicrypt will read the card as well...the programmers are real easy to use,and plenty of us on here can talk you through the process once you have the card etc...ps..the diablo 2 is only a tad more with the same chnl i beleive...and will probably start to open more things soon,and so easy to load files
Omnia card warning!!!
Watch out guys! There are some Omnia cards in the market that are fake!!
Those cards were meant to be sample cards given out for testing and now are mass produced but not genuine cards. Those cards are working with the public Omnia loader: OminaLoader12.exe of 53248 Kb and ArtBisMct20.omn of 58.868 Kb but NO MORE UPDATES!
Those cards are spread in these days and are ONLY working with ART, BIS and MCT until the first update from providers. The seller same as COCO is promising Al Jazeera Sport and other providers but those cards will never be supported and will be working only with ART, BIS and MCT and cannot be updated. At the first key change no more updates card is DEAD!!
So don?t buy this fake cards original Omnia and Omnia Plus will be in the market very very soon with new loader and more providers!!!
How to distinguish original OMNIA from fake?
they come blank m8...then you load the needed files (when available) onto the card using a programmer...the cas 3 plus used for the diablo cam will do the trick...think these are about 50quid ish....then just update with a new file as and when needed...i would imagine a multicrypt will read the card as well...the programmers are real easy to use,and plenty of us on here can talk you through the process once you have the card etc...ps..the diablo 2 is only a tad more with the same chnl i beleive...and will probably start to open more things soon,and so easy to load files
yeah thanks for the reply,I"ve been doing a bit more digging and I think the cas3 is out as it would take me over 6 hours to down load the cas studio.
would the infinity usb unlimited be ok,I can down load that software ok.then once I have the omnia card and the files I would be sorted yes?
I"m assuming someone would post files on this site once the cards are generally available.
ps spiderboxes still need broadband and thats no good to me.(I cant even use the internet at all after 4PM)
Comment