CT 5000 HD Combo Plus died

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sihi77
    Newbie
    • Apr 2009
    • 7
    #1

    CT 5000 HD Combo Plus died

    It is first time I tried to load SW 2... After loading the SW 208p firts, the STB rebooted and is staying now on "Start up" stage endlessly. No forward, no backward...
    How to reanimate it? Thanks in advance!
    Tags: None
    • teno
      Newbie
      • Dec 2009
      • 3
      #2
      1?Press and hold "menu" +2? boot the decoder(you return to default value) and recharge all(firmware etc)

      When not work, only the same but with serial cable

      P.s excuse me for my bad english, i hope that you understand me:-)
      Last edited by teno; 30 December, 2009, 22:54.

        Comment

        • sihi77
          Newbie
          • Apr 2009
          • 7
          #3
          Thanks teno! I completely understand you. I did it already but now the CT stays on LOADER regime all time. No chance to contact via cable even. Does it mean that the device is now for trashcan?

            Comment

            • teno
              Newbie
              • Dec 2009
              • 3
              #4
              Never lose hope .. the 208 has these problems for many 5000hd+, is a 207 with a fix for the reboot problem .. did not work fine .. what software uses for connect with the cable null modem? try to connect to run the decoder off (without power) and start it soon as you connect,if you can communicate you can solve
              i have an other last soluction, but before test this one:-)

              Happy new year!
              Last edited by teno; 31 December, 2009, 13:47.

                Comment

                • sihi77
                  Newbie
                  • Apr 2009
                  • 7
                  #5
                  Everything is OK now. Simply com1 port of my laptop was out. 180p is back on CT and works well like before.
                  Happy new year to you too, teno!

                    Comment

                    • teno
                      Newbie
                      • Dec 2009
                      • 3
                      #6
                      this case seemed strange to me, well, I'm happy for you
                      remember that only in extreme cases, with your receiver you can try to recover it without replacing the flash, is complex but can be done

                      bye

                        Comment

                        Previous template Next
                        Working...