DIABLO CAM 2 HARDWARE 3.9

[DEMONACER]

Updated cam to Ipnosys3 and updated new keys.bin dated 7/2/2010.All viaccess clearing,Tvglobo etc working fine but new key for Rai channels @ 13'east and biss channels down even though they show up on cam menu.
Diablo running in TM6900HD SUPER with original TM 7.14 software.Was using magicpatch 6.79 but found that sometimes there were recording issues.
Would it be worth going back to 6.79 patch and using diablo too.
I have checked Rai and I have latest keys but diablo still won't clear them.Checked my config and all emus on.Latest biss key for jsc feed @ 10'east also installed but no biss channels clear at all.Any advice would be appreciated.

[Manic01]

Have you tried turning off patch to see if diablo works ok then?

[DEMONACER]

Have you tried turning off patch to see if diablo works ok then?

Tried that m8 and the cam works ok,except it won't touch Rai channels or any biss keys so I went back to 6.79 patch and rai clearing with softcam same with biss keys so just going to keep both active for now.Cam was clearing Rai no problems until last keychange but I checked and they same keys that the softcam uses to open them now.Reformatted cam and installed ipnosys3 again so will manually change rai keys on diablo to see if that helps.All viaccess,digi,tvglobo,arqiva etc are clearing with patch off and cam active just not biss keys or rai.

[taso]

how program diablo cam 2?

[aldermoor]

I am used to Dragon cam and card. I bought the new Diablo Cam 2 this week with CAS 3+.
Does any one can help me how to programme the Cam?

[benny/9]

I am used to Dragon cam and card. I bought the new Diablo Cam 2 this week with CAS 3+.
Does any one can help me how to programme the Cam?

***********************************************
have a look at this doc, mate it might help you

[aldermoor]

Thanks for trying to help. Very kind. File does not open,message saying folder invalid or corrupt!please check and re-send again. Regards

[benny/9]

Thanks for trying to help. Very kind. File does not open,message saying folder invalid or corrupt!please check and re-send again. Regards

***************************************
i have just tested the download and it works first class
the problem is at your end try useing firefox as your browser
if you dont aready use it, if you use the internet explorer it has
lots of problems downloading from forums.

[aldermoor]

you right. It is a very good guide. Many thanks.
The ipnosysis a "rar" file , not recognised for the update! Sorry!

[aldermoor]

I managed to do it. I've just used winrar to download the file.
Thanks again for your help benny/9

[altgr4]

great! thx!

[yamaha1]

Does anyone know whats open with the diablo cam 2 lite atm for the tm 1500ci ? cheers

[Abbe68]

Diablo CAM 2 Underworld keys

I am bought Diablo 2. I am totally new.Where I can find new Dialblo Underworld keys? I am sorry that for some one simply question.