How to Program Omnia+ Card

[Manic01]

For this, We used a dynamite programmer in phoenix mode 3.557MHZ

Any other programmer phoenix mode 3.557MHZ capable should work.

First make sure it is in phoenix mode 3.557MHZ

-- Then, start the loader, choose the port and click connect as per picture.





If you don't have the card inserted it will give error and will ask for you to insert it. As per 2 pictures below.






Insert card and click ok. Atr will show and Update button will lighten up.





Click Update and a window will pop up so you can open the omnia file to load as per picture below.





Card will then start loading.

[Manic01]

After it finished it will show as below. Remove card and it is ready to use for CanalSat.

[jumpinjo]

very good post for all us noobs

thanks bud

[Manic01]

There will be a new laoder out soon for usb programmers as it seems mostly only serial ones working at the moment.

[jumpinjo]

i swear by the infinity usb pheonix

[SuperSat]

After it finished it will show as below. Remove card and it is ready to use for CanalSat.





Tutorial by Joedenoble

what about the omnia card shall I do the same?

[opsmonkey]

is there a list of channels this opens for deffo.. or is it only canalsat..?

[Manic01]

I think canalsat and sct still open. Not sure about the rest at the moment.

[amzioujda]

merci bien