works for me.
gamma
Collapse
X
-
-
How to Programme TNN Files Using TNNTeam loader
--------------------------------------------------------------------------------
I always recommend After you download the necessary files needed you unpack them and save them to Desktop this way you know where to find them
You will need both your Usb & serial cable plugged into your Cas Programmer, to successfully programme your Gamma Card using TNNTeam Loader v1.0.
1.Start up the CIS 8.7 software, you should have a shortcut icon on your desktop.
2.Click on the Utilities tab, and then PHOENIX icon,
3. Click on Phoenix @ 6.00Mhz
4. Click on Hide
5. Open TNNTeam Loader v1.0
6.Now insert your Gamma card chip facing down
7. Click on Load and Prog. TNN File
8. Navigate to your desktop to where you have saved (finikas_doro__for_6_type_cards)
highlight it and click open.
9. Programming will start automatically
and wait for the Card to finish programming.
10. Press the Reset Tab to view the Hsn
If hsn is displayed as FFFFFF sorry but this file isn't valid for your Card
If you see a Hsn you will have a working file and Nova Greek will Clear
click exit and remove your card
Thanks goes to Compass for this guide.Comment
-
-
Comment