Is it possible

[Tez2010]

Looking to buy a new reciever , is it possible to have 2 different reciever hooked up to one dish? Got a technomate 5400 wouldn't mind gettin the protek 9600. Cheers

[Manic01]

Yes, but if on same sat one needs to be in standby unless using same tp through loopthrough or using twin lnb.

[dick b]

yes best way is a twin LNB

[Tez2010]

Cheers. Is it not possible to do it through a twin coax cable?

[Tez2010]

(twin coax connector)

[Manic01]

Nope.............
loop through or twin lnb or one receiver off as stated.

[Tez2010]

Loop through? Don't understand pal? Quite new to all this

[mdt]

at the back of your stb there should be 2 f-connector male sockets. 1 is input and 1 is output. so you could have your dish on the input then have a coax from the output going to a input on a second receiver but this way is limited as your second receiver doesnt have independent control. best way is have a twin lnb and stb one to control the dish and stb two can watch at the same time but only on the same satellite. id just have 2 systems, 1 motorised main system and a secondary fixed dish maybe 2 or 3 lnb,s for the main birds. regards mdt