How to connect 2 tv's to 1 dish

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jaykay4407
    Junior Member
    • Apr 2010
    • 35

    #1

    How to connect 2 tv's to 1 dish

    Is it possible to run 2 tv's from the same sdish. I have one tv connected up already and no problem, I want to connect a second and the second tv is nearer to the dish than it is to the main tv.

    Do a need a twin lnb? are there any guides here to help me out.
    Thanks in advance
  • dick b
    V.I.P. Member
    • Jun 2009
    • 2462

    #2
    easy one that mate just get a twin output lnb and run a new cable to the 2nd tv you will need enough cable some F-plugs and some self amalgamating tape to waterproof your connections if you are careful and dont move the dish you will not need to re-align it. if you get a quad lnb it will allow for more TVs in the future.
    Last edited by dick b; 4 June, 2010, 12:49.

    Comment

    • jaykay4407
      Junior Member
      • Apr 2010
      • 35

      #3
      So I just need to get a twin lnb and some co-axial cable and a co-ax plug for the back of the second tv, Is that right?

      Comment

      • psats
        DK Veteran
        • Sep 2008
        • 823

        #4
        Originally posted by jaykay4407
        So I just need to get a twin lnb and some co-axial cable and a co-ax plug for the back of the second tv, Is that right?
        there are cheap qaud ones on ebay for price you can have spare outputs

        Item number: 130393441107

        Comment

        • Sirus
          DK Veteran
          • Nov 2008
          • 340

          #5
          Originally posted by jaykay4407
          So I just need to get a twin lnb and some co-axial cable and a co-ax plug for the back of the second tv, Is that right?
          You'll need a sat receiver for each tv(obviously), both hooked up and running off one lnb/dish the way the guys are saying
          Last edited by Sirus; 4 June, 2010, 21:51.

          Comment

          • jaykay4407
            Junior Member
            • Apr 2010
            • 35

            #6
            Firstly, thanks for all replies but maybe I should explain better
            At the moment I have a dish that has 2 single lnb's on it, as I recieve into my dreambox 2 different things. What I want to do is connect my other tv (which is much nearer to the dish than it is to the main TV)

            I'm not sure though, how the two cable from the two lnb's end up as one cable when they come into the house and into the dreambox. I'm not bothered that I will only be able to change channel on the main tv.

            Therefore to get both of the signals from both of the cables do I need to buy a 4 way lnb and, if so, how do I get them to end up as 1 cable into the back of my arial in on the second tv.
            Really hope you follow this.
            Thanks in advance

            Oh and by the way, it's not sky as I am in Cyprus

            Comment

            • smirnoff_rules
              V.I.P. Member
              • Mar 2008
              • 8603

              #7
              You just need a four way lnd to replace the one you use the most , so at the moment you have two lnb's pointing at different sats ?
              any information provided is for educational/experimental purposes only.

              Comment

              • jaykay4407
                Junior Member
                • Apr 2010
                • 35

                #8
                Ok, I have now been on the roof,
                I have one dish with 2 lnb's and the cables from these two go to a second dish.
                The second dish has 1 lnb (FTA) and the cable from this one (and the other two cables) go into the bottom of a black box 1 cable then comes out of the bottom of this same black box and goes to my dreambox.

                Comment

                • jaykay4407
                  Junior Member
                  • Apr 2010
                  • 35

                  #9
                  Attaching picture
                  Attached Files

                  Comment

                  • dick b
                    V.I.P. Member
                    • Jun 2009
                    • 2462

                    #10
                    I"m still trying to under stand your set up.are you in fact receiving three different sats and feeding the lnb outputs into a diseqc switch? and if so which sat do you want for your 2nd stb and tv.because that is the lnb you will have to change for a twin keeping the original cable going to the diseqc switch and the 2nd going straight to the 2nd stb.
                    what size are your dishes as you could also consider a motorised setup but I"d have a good read of the sticky section first.

                    Comment

                    • jaykay4407
                      Junior Member
                      • Apr 2010
                      • 35

                      #11
                      Ok, I have 2 dishes, one of which I know is FTA. This one has 1 LNB
                      The second dish has 2 lnb's to recieve 'showtime' and 'BFBS' which are satellites here in Cyprus.
                      All 3 cables go direct into, what I think, must be a diseqc and then into my dreambox in the house at the main TV.
                      Now here in Cyprus, it gets very warm so we watch TV outside. The TV outside is quite near to the dishes (its a bungalow) and I want, if possible, to take a cable from any of these 3 things that we recieve to the tv outside which has an ariel in.
                      I want to try and utilise what I have already, as apposed to buying any more dishes etc.
                      I also have a spare FTA box, that I don't use since I got the dreambox.
                      Do you think you can help, sorry about being a newbie.
                      Thanks in advance

                      Comment

                      • Hoppo
                        Member
                        • May 2009
                        • 64

                        #12
                        could you use a tv signal sender plug one sender into the scart of the dreambox then the other sender into your outside tv scart then you can watch all from your dreambox
                        Steve

                        Comment

                        • jaykay4407
                          Junior Member
                          • Apr 2010
                          • 35

                          #13
                          Thanks but have tried a sender but can't get a signal I think, through all the conrete

                          Comment

                          • Hoppo
                            Member
                            • May 2009
                            • 64

                            #14
                            As a temporary measure a long scart lead from your dreambox to outside TV or extend your sat cable to outside and move your dreambox outside. You could get a twin LNB on your FTA sat dish and run an extra cable to your other FTA box. If you want all your tv channels you will need three twin LNB’s, diseqc and another dreambox

                            Comment

                            • psats
                              DK Veteran
                              • Sep 2008
                              • 823

                              #15
                              are both box,s used at same time.?
                              you could just use a splitter or the out from the dreambox

                              Comment

                              Working...