transporder problem on 39'E

[plamen.1973]

I have problem with my motorezed dish.
I lose a signal on 39'E 12524H/27500, but other transporders are O.K.The picture and sound are come and go and I can watch channels.
when I watch signal meter on TM 5200d super
97% down to 20%,then again to 89% and up to 97%.

Where is the problem?

[mdt]

you could try deleting the txp and then rescanning it to see if that works. could be interferance from somewhere. you could also check and make sure that the outer and inner wires on the co-ax are not touching at the f-connector. regards mdt

[plamen.1973]

you could try deleting the txp and then rescanning it to see if that works. could be interferance from somewhere. you could also check and make sure that the outer and inner wires on the co-ax are not touching at the f-connector. regards mdt

I try it and again same prob.Could be it the LNB or what?

[Manic01]

I will check on mine mate, just a sec.

[Manic01]

Rock solid on diema, whata re you using to clear bulsat?

[plamen.1973]

Rock solid on diema, whata re you using to clear bulsat?

I use subcribstion card from Bulsatcom and I bought package from them.
I think my dish is move when is windy and on this 12524H/27500 the LNB( Invacom SNH-031) it is very sensitive.