things i need to install my motor and dish

[mario123]

time to put this 1m dish up just need a idea of what i need to get it up and where i can get it?

ok need some coaxial cable is there different kinds what kind should i get?
need some kind bolts to fix my t and k brakets to to the wall what kind do i need?

[yamar1]

time to put this 1m dish up just need a idea of what i need to get it up and where i can get it?

ok need some coaxial cable is there different kinds what kind should i get?
need some kind bolts to fix my t and k brakets to to the wall what kind do i need?

rg6 cable will be fine, spend time and be carefull making the ends off though and seal with amalgalating tape. i used 10mm metal rawl bolts on the 18"t&k brackets and it has survived some strong winds without any issues.

[mario123]

rg6 cable will be fine, spend time and be carefull making the ends off though and seal with amalgalating tape. i used 10mm metal rawl bolts on the 18"t&k brackets and it has survived some strong winds without any issues.

yeah ok. the 10mm rawl bolts u use i am just renting the house im living atm can them bolts be taken out of the wall ok when im taking the dish down so i can fill the holes with cement?

[dick b]

if you put the bolts back in loosely after taking the mount down you can usually rag them out as they rely on being tight to get their grip. or you can use 10mm plastic plugs and 8mm coach bolts 60mm long.

[mario123]

if you put the bolts back in loosely after taking the mount down you can usually rag them out as they rely on being tight to get their grip. or you can use 10mm plastic plugs and 8mm coach bolts 60mm long.

ok i check them out m8

[yamar1]

ok i check them out m8

the secret with rawl bolts when you want to take them out is to screw the bolt back into the rawl bolt inside the wall, give it a clip with a hammer, releasing the grip in the wall and then wiggle it out complete.