Hi All, I dont know if I posting this in the right place, if not sorry & can the admins move it. I have here a cheap no name FTE sat decoder, its a polin\eurosky or one of those clones. It does have a 10pin header on the board and Im looking to Jtag it, I have found on the net a 10pin header pinout its says that pin 10 and pin 2 are ground I have checked it with a meter and pin 10 is ground but pin 2 does have a bit of resistance. I have built a Jtag interface (simple on with resistors) but am not getting any coms with Jkeys, what else can I check?
Thanks
Steve
Thanks
Steve