39e

[yasminandrio]

i cant get 39e i am in york i am using a 1 meter motorised dish i get 75% signal and 20% quality thanks

[RobPa]

is that a question or a statement?

[mdt]

i cant get 39e i am in york i am using a 1 meter motorised dish i get 75% signal and 20% quality thanks

you should be getting alot more than 20% quality so try and get a better signal via the motor menu via small movement or via ajusting the lat/long details in usals. if you still cant get a good quality reading then your dish/motor could be slightly out. regards mdt

[yasminandrio]

Sorry just read my thread bk,,, ive had a few glasses of wine, i was asking could some one help me get 39e i cant get a pic thanks

[.: JaCkPoT :.]

Read this buddy : http://www.digital-kaos.co.uk/forums...te-dish-11239/

[james35]

I live in york as well and have practically the same problem! I have tried adjusting my dish but never got a picture.

[yasminandrio]

Thanks Jackpot i have read this before but i will have another go, I can get a signal and quality in yellow when fine tuning then when i look for channels it goes, I was at it for about two hour just on 39e.... my head is banging this morning all i can see is 70% signal bar and 20% quality. aaaaaaahhhhhhhrrrrrrrrrrr

[dougnomore]

Thanks Jackpot i have read this before but i will have another go, I can get a signal and quality in yellow when fine tuning then when i look for channels it goes, I was at it for about two hour just on 39e.... my head is banging this morning all i can see is 70% signal bar and 20% quality. aaaaaaahhhhhhhrrrrrrrrrrr

Try setting up on 12524 H SR 30000 FEC 7/8 this transponder is strong.

Some others are weaker.

[yasminandrio]

Will try this when i get home thanks mate

[pob639]

bulsat 39e is down on public keys only working for Ipnosys Diablo Light v2 Rev3.9 EMU Only so when setting up make sure you use a free to air channel.
my signals was all over the place yesterday on a lot of sats with all the cloud n rain we was getting in the midlands