new system help

[notluckyuk]

HI,

my third install, but all is not well..

Set on thor 11325 bbc world service 98s and 90q then moved to 13e all ok 19.2 all ok then to 28.2 nothing. reset on 28.2 then back and lost thor. so is this my bracket slightly out of the arc?

Thanks

[patkins]

There are better qualified people on here to answer your problem than me as I don`t have a motorized set up, but your problem might be at 28e because thor 0.8w is a pretty tight beam whereas 28e can often confuse tps on 19 and 13.
The fact that you get thor 19 and 13 seems to suggest this although it could be an arc adjustment that is needed.

[notluckyuk]

thanks Pat, will strip it down at weekend and start it again...

[dick b]

HI,

my third install, but all is not well..

Set on thor 11325 bbc world service 98s and 90q then moved to 13e all ok 19.2 all ok then to 28.2 nothing. reset on 28.2 then back and lost thor. so is this my bracket slightly out of the arc?

Thanks

It sounds like your pole is not 100% plumb check all round with an accurate spirit level,when sure its plumb re-check co-ordinates are correct in the box and lat is set on the motor the same as box and again as accurately as possible.put box to usals and tune 1W in again by moving the motor/dish assembly L/R.then re-try all the other sats.