signal and quality

[jon48]

im trying to get hotbird on my dish and it shows 0 strength 0 signal 0 quality can any1 tell me how to set up tha sat side to get the channels please svhd combo

[patkins]

If you are getting no signal then you are not on hotbird. Slightly loosen dish bolts and move the dish slowly to the righ and slightly up and down as well until you get a signal. Your satellite menu should tell you which sat you are on.

[daithi]

could be your connection
because if ya move the dish it should register or the info bars even if its just for a split second as ya pass over the correct spot