rebooted with formatted usb stick in,made single partition with kcc to ext3
then in putty i typed
cd /mnt/usb
mkdir bro1
mount -t ext2 /dev/sda1 /mnt/usb/bro1
as most of the time i had no usb0 folder
this created a bro1 directory.it could be any name you use when tyrping the command mkdir first
ftp the image to /mnt/usb/bro1 with your favourite ftp program
then when done in putty
type command "cd /mnt/usb/bro1" to enter in folder where is tar.gz file of enigma
18. to check it type "ls -aln" and see , if all is OK, if yes, we will see our file tar.gz
19. type "tar xzvf enigma2_cuberevo_mod_PKT.tar.gz
then it begins unpacking
after unpack in putty type
cd /
umount /dev/sda1
or
now you can unplug your usb and turn of box with power switch at the back
then plug stick back in and whilst turning back on with power switch at the back press the correct button on the remote control to boot to enigma for 6 seconds roughly
thanks for all the help from
k2k2000
arken
acer2
aftermath
in no particular order
then in putty i typed
cd /mnt/usb
mkdir bro1
mount -t ext2 /dev/sda1 /mnt/usb/bro1
as most of the time i had no usb0 folder
this created a bro1 directory.it could be any name you use when tyrping the command mkdir first
ftp the image to /mnt/usb/bro1 with your favourite ftp program
then when done in putty
type command "cd /mnt/usb/bro1" to enter in folder where is tar.gz file of enigma
18. to check it type "ls -aln" and see , if all is OK, if yes, we will see our file tar.gz
19. type "tar xzvf enigma2_cuberevo_mod_PKT.tar.gz
then it begins unpacking
after unpack in putty type
cd /
umount /dev/sda1
or
now you can unplug your usb and turn of box with power switch at the back
then plug stick back in and whilst turning back on with power switch at the back press the correct button on the remote control to boot to enigma for 6 seconds roughly
thanks for all the help from
k2k2000
arken
acer2
aftermath
in no particular order