Cuberevo / mini Emulators

[grizzlyt]

IncubusCamd ver 0.8.3+ NewCS 1.66

IncubusCamd ver 0.8.3+ NewCS 1.66

NewCS - 1.66 RC1
Changelog
v.1.66 RC1
All cdks are new, due to server crash.. many many changes to libs etc.
Support for TNTSAT.
Experimental support for *** 0963. NB! Remember to put the 4 byte hex boxkey in config!
Multi-realms added to chameleon.
Support for pin-code on specific channels specified by in config.
Added the ability to disable/enable certain virtualcards on chameleon in config, or disable whole list.

Quote:
NB! NewCS has gone green - removed all support for windows
Time to grow up, get a powerfriendly little linux-device to run NewCS on!
coming soon on our panel...

wait please

[robbsson2000]

cant get softcam to work

hi all i cant get the incubus to work.. cant dowload plugins in the black pearl img.
and the incubuc 5 don?t work .

please help..

[aftermath]

I take it its a Kathrein box you got ?

[fredh]

Config

Please find config as requested, I am never sure if you can remove all the garbage and just leave the server details:


################################################## ############################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################################## ############################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
background_execution=1
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
debug_level=1
# This option enables (1) or disables (0) the writing of debug information to the
# console.
log_to_console=1
# This option enables (1) or disables (0) the writing of console output to a log file
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
logfile_name=/var/bin/incubusCamd.log
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=1
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
#When activated, camd will listen on the specified port for connections. All
#log activity will be broadcast in real-time to connected clients.
console_logs_broadcast=1
console_logs_broadcast_port=666
############################ caid configuration ##############################
#
# First of all the cam use the incubusCamd.prio file, then use the
# configuration below.
# Sections are defined by the value of the CaID.
# You can choose the default ecm table used by the codify, this means that
# you can choose the first byte of the raw ecm that is downloaded from sat.
# If you don't know what value to insert, use "80". (all value are in hex)
# Default value for ecm_table is 0x80.
# The option "priority" tells if one caid should be selected before try
# another one with a priority value greater.
# The less is the value the greatest is the priority. Choose from "0" to any value,
# priority value is decimal.
#
[CaID:0100]
ecm_table=80
priority=1
[CaID:0500]
ecm_table=80
priority=1
[CaID:0600]
ecm_table=80
priority=1
[CaID:0919]
ecm_table=80
priority=1
[CaID:093B]
ecm_table=80
priority=1
[CaID:0B00]
ecm_table=80
priority=1
[CaID:0D00]
ecm_table=80
priority=1
[CaID:1700]
ecm_table=80
priority=1
[CaID:1800]
ecm_table=80
priority=1
[CaID:2600]
ecm_table=80
priority=1
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000501:CaID:1833]
# ----------------------------------------------------------------------------
# Decoder type indicates whether the cam will attempt to decode this provider
# in software, or through a card-server. Supported values are:
#
# 0 - Use internal softcams.
# 1 - Connect to a card sharing protocol card-server.
decoder_type=1
# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostname>:<port>/<des_key>
# aroureos://@<hostname>:<port>
# radegast://@<hostname>:<port>
#
# Example:
# newcamd://foo:[email protected]:12345/0CE3476FF2E1C9D9A0A109B371E3
#
# Multiple card-server url's can be specified for server fail-over.
# If the emu fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 16 servers can be added from index 0 to 15.
#
# You can choose also to select a cccam or gbox server, but they must be declared
# in the "servers configuration" section ( [Servers] ).
# e.g. : if you want to use a cccam server for a provider you must put it on
# the parameter card_server_url_0=cccam://
# NO MATTER the value after the double slash because server configuration is
# made in the section [Servers].
# Only for newcamd, radegast and aroureos is usefull to put correct connection
# parameters because they are provider dependent.
#
#
# Example i want to use mine card into the slot with newcs for prov 0501 on nagra3 (caid 1833)
card_server_url_0=newcamd://username[email protected]:10550/0102030405060708091011121314
[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
card_server_url_0=cccam://
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# cccam://brianblythe2006:ser732009@xxxxxx:12000/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
# gbox://<localhost>:<localport>:<password>@<peer_address>: <peer_port>:<peer_pass>/[EMM]
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
card_server_url=cccam://brianblythe2006:ser732009@xxxxx:12000
card_server_url=cccam://<username>:<password>@<hostname>:<port>
card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>: <peer_port>:<peer_pass>
card_server_url=cccam://<username>:<password>@<hostname>:<port>
card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>: <peer_port>:<peer_pass>
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
# 1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
# 1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
#

Many thanks in advance

[grizzlyt]

Hypercam 1.0.4 multi receivers

Hypercam 1.04 multi receivers
*************************
Release 1.04

=> Added one type of *** card support
=> Added hypercam.status file, see configuration file for settings
=> Fixed clear => crypted switch for some channel not providing new PMT

Thanks for Hypercam Devs for this piece of software !

hypercam.1.04.7z

[ipbox2008]

why in start of task there are this errors:

cuberevo-250hd:/var/bin# start_hypercam.sh
killall: mgcamd: no process killed
killall: mg_launcher: no process killed
killall: newcs: no process killed
rmmod: sci: No such file or directory
killall: hypercam.ipbox: no process killed
/var/bin/api3-wrapper.sh: line 9: syntax error: "(" unexpected
/var/bin/start_hypercam.sh: line 12: /var/bin/sci-ng.sh: not found

Is non compatible with cuberevo 250hd?

thank's

[satman]

why in start of task there are this errors:

cuberevo-250hd:/var/bin# start_hypercam.sh
killall: mgcamd: no process killed

mgcamd is not running

killall: mg_launcher: no process killed
mgcamd_launcher is not running

killall: newcs: no process killed
newcs is not running

rmmod: sci: No such file or directory
killall: hypercam.ipbox: no process killed
hypercam is not already running

/var/bin/api3-wrapper.sh: line 9: syntax error: "(" unexpected
/var/bin/start_hypercam.sh: line 12: /var/bin/sci-ng.sh: not found

driver is probably already loaded and/or the .sh script files is missing from /var/bin

Is non compatible with cuberevo 250hd?
only tested with 9000HD but dont see why that would stop working on 250HD


thank's

see RED.....

[grizzlyt]

Hypercam 1.05

Hypercam 1.05
**********************
=> Fixed clear => crypted switch / Dreambox PPC specific operations
=> Workaround for Dreambox PPC poor smartcard drivers timing...

hypercam.1.05.7z

[grizzlyt]

Cuberevo / mini Emulators

Hypercam 1.0.6

Hypercam 1.06

Release 1.06
******************
=> Fixed card support on Dreambox PPC for N2/N3/IRDETO/***
=> Fixed streaming decryption on Dreambox PPC

[despdan]

Hypercam 1.06

Release 1.06
******************
=> Fixed card support on Dreambox PPC for N2/N3/IRDETO/***
=> Fixed streaming decryption on Dreambox PPC

If we ever get a card dumped will this clear the channels on Irish n2 stream on a dreambox?

[satman]

@dan yes it will

[kaneguru]

thank you.
did it work on qbox_hd also?

[kaneguru]

hello.
on my qbox run newcs well.
another receiver like dream or dbox can connect to my box also well.
but myself cannot connect to newcs.
not incubus or hypercam.
what make i wrong?

in incubus conf i activated newcamd line.

can anybody help me?

thx

[aftermath]

IncubusCamd 0.85

IncubusCamd 0.85

.
.
.
.
.
.
18/06/2009, V0.85
- deleted old priority system for caid, now will be used firstly the prio and then a cycle selection
- SID in hex value instead of dec one
- fixed some bugs on caid ecm parsing
- fixes for stability/less-crashes (crashes were made by the pmt handling, using pmt file wich the writes is slower than the channel change,
now should be fixed in almost all cases)
- still open the 2.1.1 protocol support and previous version
- fixed a bug on reading keys for the internal emulator, now also unsupported softcam.key files are skipped in the unknown fields
(read the softcam.key file to see how to build a new one)

[kaneguru]

hi.
i have incubus,but i will use my softcam.key for digitv.

what should i do?
i have write follow lines into the conf

[Prov:002111:CaID:0000]
# ----------------------------------------------------------------------------

decoder_type=0


but the didn?t work.
whats wrong?

thx