installing U-Boot 1.3.3

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jamie-warez
    Newbie
    • May 2009
    • 9
    #1

    installing U-Boot 1.3.3

    Hi all

    I am trying to update my ipbox 9000 hd

    it has U-Boot U-Boot 1.3.1 on it
    i am trying to put U-Boot 1.3.3 for ntsc support

    I have tried with power plus > arrow but i get serial upgrade instead of usb upgrade i am using flashtools latest.

    i have also used my usb stick with the up allow way but after installing when i check my u-boot version it still says its U-Boot 1.3.1
    Tags: None
    • aftermath
      V.I.P. Member
      • Mar 2008
      • 4345
      #2
      read through here http://www.digital-kaos.co.uk/forums...-9000hd-11407/
      scroll down to where it says install u-boot 1.3.3

        Comment

        • catseye
          DK Veteran
          • Nov 2008
          • 388
          #3
          Just hold your finger on ok & power button m8 whilst machine is in standby mode

          Then press & hold power button only

          1st booting message appears then a few seconds later usb upgrade should appear

          Also if i remember right with mine even after installing uboot 1.33 with flash tools its still read as uboot 1.31 & i was advised this is normal

          Cheers

          Originally posted by jamie-warez
          Hi all

          I am trying to update my ipbox 9000 hd

          it has U-Boot U-Boot 1.3.1 on it
          i am trying to put U-Boot 1.3.3 for ntsc support

          I have tried with power plus > arrow but i get serial upgrade instead of usb upgrade i am using flashtools latest.

          i have also used my usb stick with the up allow way but after installing when i check my u-boot version it still says its U-Boot 1.3.1
          Vu Duo & Channel Master 1.2 meter dish located in middle england

            Comment

            • aftermath
              V.I.P. Member
              • Mar 2008
              • 4345
              #4
              Originally posted by catseye

              Also if i remember right with mine even after installing uboot 1.33 with flash tools its still read as uboot 1.31 & i was advised this is normal

              Cheers
              Yeh i meant to post that part this morning but been installing windows7 and forgot

                Comment

                • jamie-warez
                  Newbie
                  • May 2009
                  • 9
                  #5
                  Got usb upgrade now! this way thanks for this post.
                  Funny that in all manuals it says to use power with >
                  installed u-boot 1.3.3 no problems this time..
                  not tested ntsc yet and i ain't moving Tuesday.
                  Looking forward to playing with it at my home in he us.


                  thanks for the help.

                  Originally posted by catseye
                  Just hold your finger on ok & power button m8 whilst machine is in standby mode
                  Then press & hold power button only

                  1st booting message appears then a few seconds later usb upgrade should appear

                  Also if i remember right with mine even after installing uboot 1.33 with flash tools its still read as uboot 1.31 & i was advised this is normal

                  Cheers

                    Comment

                    Previous template Next
                    Working...