How to watch pay channels with Protek 9600 IP

[mdt]

simple as above, find a good server

the maxx1000 cant take a line from a server and needs a id file for retzina... dont post unless you know what your on about!

[Jcorradi20]

DM 500s help..

Hello friend

Alright?
I am new to this forum and would like to get help from you guys, to open the closed channels in the Sky Dreams500s.
I would like also to know what the best and cheapest HD receiver box to buy at the moment.
Thank you.

[mdt]

Hello friend

Alright?
I am new to this forum and would like to get help from you guys, to open the closed channels in the Sky Dreams500s.
I would like also to know what the best and cheapest HD receiver box to buy at the moment.
Thank you.

the best cheapest hd reciever imho atm is the vu+solo clone... as for opening channels on 28.2e then google is your friend or pm me and ill see if i can advise you further,regards mdt

[seamouse]

the maxx1000 cant take a line from a server and needs a id file for retzina... dont post unless you know what your on about!

why dont you shut up and not be rude, i was clearly posted about how to get paid channels, it was no ref to the box at all

[seamouse]

a good cheap HD box is the black panther for about ?140, used them for a few years, as well as even open boxes for ?55 are not to bad

you get what u pay for , limited menus ect

[elloko7]

hi

thanks

[geo1212]

is that working in Greece?

is that working in Greece?
can i watch mpeg4 with that?

How to load software to 9600IP

Firstly you will need the following tools:-

PC running Windows, which has an available serial (COM) port. If it does not have a COM port, you will need a USB to serial adapter

Null modem cable (also known as a crossover cable), with 9 pin D-connectors on end (female)

Download the following from the Downloadcenter:-
Click Here

Uploader v13
Bootloader 1.34
Software BorisT53


Please note: If your receiver is already flashed you don't need install those files. All you need to do is a internet connection and you are ready to go.

To open the files, you will need to have Winzip on the PC to extract the achived files. Make sure you extract all the files to a known folder, before starting.


Load bootloader on to receiver

Run UploaderV13.exe
Select the available COM port by clicking on COM1 (if this is not the COM port to be used).
Select Boot option, by click in on Main (this toggles between Main and Boot)
Click on Open File, and select the bootloader bin file
Click on Start Down
Click on OK on screen
Press OK on receiver
Press standby ? the receiver will boot and the file will start transferring to the receiver
WAIT! - click OK on loader screen when told that transfer is complete
Press Exit on screen
Software is updated


Load software on to receiver - NOTE you can also use webloader for this function (read below)

Run UploaderV13.exe again, and select the COM port to use
This time, make sure that Main is selected, and not boot
Click on Open File, and select the software bin file
Click on Start Down
Click on OK on screen
Press OK on receiver
Press standby ? the receiver will boot and the file will start transferring to the receiver
WAIT! - click OK on loader screen when told that transfer is complete
Press Exit on screen
Software is updated


To load channel list - NOTE you can also use webloader for this function (read below)

Run Uploader
Click on ?Open File?
Choose channel list file
Press Open
Click on ?Start Down?
Click on OK on screen
Press OK on receiver
Press standby ? the receiver will boot and the file will start transferring to the receiver
Press Exit on screen
Channel list is updated

Once you have upgraded the s/w. Connect the antenna connection, and go into Menu, Installations to set up the antenna.


Set up Diseqc motor

Press Menu on the remote
Installation
Antenna Setting
Satellite - Choose satellite (press OK)
Changed Disqec1.2 to ON
Select Diseqc1.2 settings
Used left and right to move dish East / West for max signal / quality
Select Store Position - press OK
Press Exit

Job done

Follow same process for other satellites


If you have loaded the channel list from the Downloads / Settings section, you should have channels already loaded. If you want to choose pre-sorted channels, select FAV on the remote control.


Webloader

Once the bootloader is on the receiver, loading of software, keyfiles and channel lists can be achieved using the webloader function. You don't need any software for this, just open a browser on a PC on the same LAN as the receiver (IE, Firefox, Opera, Chrome, etc), and enter the IP address of the receiver, i.e. 192.160.1.6

This will then ask for a username and password. The default username is admin, and the default password is 0000. Once these have been entered, you can browse to the files you want to upload, and then send them to the receiver via your LAN

You can use Webloader to load software, keyfiles or channel lists, but not bootloader (which needs to be added via Uploader V13

Once the files has been uploaded to the receiver, please wait while it automatically reboots

More info at>>>>>> NanoXX Support Forum • Index page

[geo1212]

is that on rapidshare?

[mdt]

is that working in Greece?
can i watch mpeg4 with that?

no m8 you will need a protek 97XX to watch mpeg4,regards mdt

[maleks]

hi i have maxx 1000 stop working any solution please

[sapring]

9600ip ID

no m8 you will need a protek 97XX to watch mpeg4,regards mdt

Am I able to get an ID for two 9600ip boxes I own? I am in need please PM your details for the transaction. Thanks

[mdt]

the protek 9600ip/maxx1000/nanoxx9600ip boxs are finished and only good for fta/official viewing card now as there are no more id,s left and there wont be anymore issued,regards mdt

[hewauk]

maxx 1000

Hi,
i have maxx 1000 receiver and it is not working since last 2 weeks.
i need new software and loader please help.
Thanks

[vaiosbratsos]

hi my maxx 1000 stop working say channel lock (null) 178days. help please...

[debrightone]

Does anyone know where i can get canadian post

looking to get information on canadian cable tv or satelite does anyone know where i can see those post here