New ZEOS & EDG-Nemesis 5.0 for ITGATE TGS220

[freck]

Thanks to Aguda over in SP...
build by zeos for itgate tgs200, tgs210, tgs220
enjoy with zeos v3 & edg-nemesis image.
Havent tried it out myself yet......
@ B~~~~...give it a try and see how you go mate.
Freck
p.s.
I'll try to get latest url for this aswell if its not included.

[plasterer]

Just the image would do for now Freck .........Paul

[freck]

...friend of mine just called in while uploading,all done now.
Freck

[plasterer]

Cheers freck will down it and try it this week .................Paul

[Borgy100]

Hi guys.

Not sure this image will work on my model. I have a TGC200 which was one of the early ones with swappable tuner. Any time I have tried to flash an image other than TGM220 I get the :wrong image for your model error TGS220:= TGM220??

I found that by swapping tuners my box now thinks it is a TGM220 and these are the only images working for me. So after a lot of searching i came acroos the correct EDG NEmesis 4.4.1 image and the latest URL which gives acces to oanel with all add ons etc...am now running CCCam 2.2.1 like a dream. Thanks for all the help guys.

Keep up the good work...we've come a lon way since the SK cable scene!

B~~~~100

[mept1]

Hi guys.

Not sure this image will work on my model. I have a TGC200 which was one of the early ones with swappable tuner. Any time I have tried to flash an image other than TGM220 I get the :wrong image for your model error TGS220:= TGM220??

I found that by swapping tuners my box now thinks it is a TGM220 and these are the only images working for me. So after a lot of searching i came acroos the correct EDG NEmesis 4.4.1 image and the latest URL which gives acces to oanel with all add ons etc...am now running CCCam 2.2.1 like a dream. Thanks for all the help guys.

Keep up the good work...we've come a lon way since the SK cable scene!

B~~~~100

I had the same issue when trying to flash with itgate control centre.....You have to ftp the image into the temp folder and rename the imaige "update.img" then manually instal it.
This image has everthing you need

[plasterer]

Hi mept ,
you running this now on you STB
wots the EPG like ..............Paul

[mept1]

Hi mept ,
you running this now on you STB
wots the EPG like ..............Paul

Hi plasterer...just messing with it at the min....will give you a full sp later

[mept1]

1.Epg the same as the other itgate images.. if not worse
2. No option to change the language from french to english
3. No volume. flashed 3 times factory reset still no volume
4. The postive thing is it has every thing in this image to get you viewing
Nice to try another image,but i,v gone back to edg-nemesis4.4,..just glad i remembered to back it up before i tried this image

[freck]

Have ye tried the Weekepg plugin on the ITGate yet?
I used it on the TM500/600 using the UKUR image and it works fine,needs to be configured first and you can get a weekepg list from tonedeff @DW and is updated regular.
@Plasterer...might be worth a go Paul if you need better epg.
Freck

[mept1]

Thanks for the pm freck...never new that was knocking about

[mept1]

Have ye tried the Weekepg plugin on the ITGate yet?
I used it on the TM500/600 using the UKUR image and it works fine,needs to be configured first and you can get a weekepg list from tonedeff @DW and is updated regular.
@Plasterer...might be worth a go Paul if you need better epg.
Freck

Tried on edg-nemises4.4 no improvment ....but a massive improvment on urukv9 get now and next on all channels....

[freck]

You should get a lot more than now and next...I'm on hold at the moment so will look into this further when I get back.just popped in for a quick browse.

Sent from my HTC Wildfire using Tapatalk

[deeboi]

Just trying this Image for a change to see if it works, (mept1, you can change language to English by going to Menu>SetUp>System Settings>OSD Language then choose English.)

I've got an ITGate TGC200 with a Sat tuner now installed works flawlessly with UKUR images but for some reason all EDG images refuse to move my dish, infact theres not even any power going to the motor at all as the buttons on the motor dont work and there's no lights on the motor at all but when I reflash back to a UKUR image again works perfectly, anyone else having this issue with this image?

[handyguy2002]

hi guys

doe's the above file work with the TGM220

thanks in advance