What format for cams?

[deeboi]

Which ones have you tried Millzzy, I was trying some the other day but just got error while flashing them.

[Millzzy]

Hi deeboi , I have tried tm 500 super images tm 600 images , everything installs fine blue panel fully loaded from ur team but I have no audio on any of them , the ur image I'm using at the mo is for the 9100 super which I posted in another thread with the pre loaded cams but blue panel is dead so I use yours , last thing I'm gonna try later is moving the working cpanel from tm 500 super image into the 9100 and see if it works , feel so close with this guys I can taste it , I would give more updates on what I'm doing but when I posted about tm 500 images nobody seemed to bothered , but if were all on the wagon I will shout up a bit more , could do with satman sat in my lounge for a nice cuppa and a chat , I know your not stupid deeboi but just checking your renaming the images for the itgate

[deeboi]

You can use ToneDeff's panel, he has the Multiview EPG working for TM's but I believe it requires a USB to store the EPG which my old TGC200 doesn't but I'm gonna try to set up a mount later to see If I can save the EPG to that.

He has loads of usefull stuff on his panel but doesn't have any cams, I have both panels in my ITGate var/etc folder I just rename them as I need them from Cpanel.xml.deeboi and Cpanle.xml.tonedeff to Cpanel.xml
both work fine.

I tried a Manual Install and Serial Flash with ControlPanel 2.5 I renamed the file to update.img during the manual flash but can't remember if I renamed it while using Control Panel, I'll give that a go later too.

I'm gonna try some 9100 images myself later too, what box do you have m8 200 or 220?

If you have a 220 give that Multiview a try from Tonedeffs panel see if you can get it working with a usb to save the EPG on.

I'm off to mess around with this box now, I'll let you know If I get any joy with anything m8.

[Millzzy]

I have the 220 mate so will give tonedeff a go as.well later , one other image I tried mate was the ds team image version 4 for the 9100 seems a stable image but no cams loaded , I just can't figure out why I have no sound otherwise the tm500 super image would be perfect let us know how you do and ill do the same mate, one other thing every image I install I do manually through the tmp folder then do a.full factory reset via.the front of the reciever

[deeboi]

KK thanks, I'll do them manually from now on to test them.

[Millzzy]

Quick update , didn't get much time last night but the working ur panel from tm 500 didn't work , tonedeff panel kept givin me a line error too any ideas ?

[deeboi]

I spent the rest if the day flashing images, the TM500/600 ones I tried won't move my dish, they don't put any power to the motor/lnb.
EDG Nemesis images do exactly the same thing on my TGC200.

Tried a few TM9100 got a Fatal error with one and got one to work but obviously no working blue button panel as the image was from 2008, .

Has anyone got any 4shared links or anything to UR TM images?
Would be greatly appreciated.

Here's the cpanel.xml for TD's panel that I use.
Just un-rar and ftp to var/etc on your box as usual.

[Millzzy]

Thanks deeboi, did u try the image in the thread I made with pre loaded cams , that's from late 2010

[deeboi]

I did m8 and it's the only one that would move my dish.

For full working UR Panel via Blue Button in this image just FTP the cpanel.xml in the cpanel.rar file below to var/etc on your box, should work with all UR images.

[deeboi]

Sorry, that cpanel doesn't work on any image, it's from the newer UR images and only works with those images.

I must have got mixed up with the images when thought that.

I had flashed 16 images trying to get a good one that the panel would work on, and I thought I had one until I re-checked and noticed I must have got mixed up with the images, .

I have 3 of the newer(ish) images that the panel is still active on and works on, flashed fine to my ITGate TGC200 but they won't move my dish at all.

Has anyone with a TGM220 tried any of these yet?

These were:-
TM-500 S-TM600 UR _update-11-3-11
TM-500 S-TM600 UR23 _update-11-3-11
TM-TM600 ur_tm-500Super URupdate-180211

[haribo]

cpanel.xml i think you need to look inside it, rather than keep just moving it from image to image.
if you have a working TM image, get the URL from the hidden .update file, get the links from cpanel.xml and then you can add the full URL to your own cpanel.xml.

[deeboi]

How do you do that though?

EDIT: I mean where is the hidden .update file?

I rewrote the cpanel.xml to point to my server but if I can find a different way that would be better.
Inside the original cpanel.xml file there are only full links to third party sites.

The first part of the url must be in the image somewhere, here's a line from the original ITGate cpanel.xml to Download and install CCcam.

Do you know where it calls the URL from? Thats what I can do with changing I think.

<softcam name=" CCcam v2104 (ALL)" url="/CAM/CCcam/CCcam2104all.tar.gz" target="/"/>

[haribo]

cpanel.cpp . though i thought the UR images wrote this to root .update file. perhaps not all .
check for it in root. update or update_tg* file. has url. but as you know youd need to edit root anyway.. so be as well to edit at source

from my android baby...

[haribo]

also a reference in update.cpp

from my android baby...

[Millzzy]

The images above deeboi I tried on the tgm220 and had no sound , I will retry later though