L53 Openbox S9 Multi-Satellite Channel List v4.40 [14 May 2011]
This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.
---------------------------------------------------------------------------
This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.
Default Settings:
Channel list format: .dbs
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
Radio Channels: 0
Favorite Channels: 0
If used in an external channel editor, change extension from .dbs to .abs
once you have edited the channel list, change the extension back to .dbs
---------------------------------------------------------------------------
What's New:
Updated channels on various satellites including: 13e, 19.2e, 23.5e & 28.2e.
I believe all the channels that caused rebooting problems, have now all been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
Of course if you already have them installed, then simply ignore them.
---------------------------------------------------------------------------
Please Note:
To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.
To remove all channels, click Menu -> Edit Channel -> Delete All
To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.
Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.
All the best
Laurals
============================================
New settings for TRING.
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.
Eutelsat W2M [16E]
11.283
V
27500
5/6
============================================
ITV 3D [Testing] New
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.
Astra 2B [28.2E]
11.973
V
DVB-S QPSK 27500
2/3
============================================
BBC HD & ITV HD Updated
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.
Astra 2D [28.2E]
10.847
V
DVB-S2 QPSK 23000
8/9
============================================
As of the [24 May 2011] I will be disconnecting the OpenBox S9, and will be running the Blade BM 7000 HD as my primary receiver, so I shall not be releasing any further channel lists, or making any more tutorials for the S9.
If anyone wishes to release their own multi-sat channel lists for the S9, then please feel free to do so.
This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.
---------------------------------------------------------------------------
This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.
Default Settings:
Channel list format: .dbs
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
Radio Channels: 0
Favorite Channels: 0
If used in an external channel editor, change extension from .dbs to .abs
once you have edited the channel list, change the extension back to .dbs
---------------------------------------------------------------------------
What's New:
Updated channels on various satellites including: 13e, 19.2e, 23.5e & 28.2e.
I believe all the channels that caused rebooting problems, have now all been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
Of course if you already have them installed, then simply ignore them.
---------------------------------------------------------------------------
Please Note:
To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.
To remove all channels, click Menu -> Edit Channel -> Delete All
To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.
Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.
All the best
Laurals
============================================
New settings for TRING.
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.
Eutelsat W2M [16E]
11.283
V
27500
5/6
============================================
ITV 3D [Testing] New
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.
Astra 2B [28.2E]
11.973
V
DVB-S QPSK 27500
2/3
============================================
BBC HD & ITV HD Updated
As the settings were changed since the release of the channel list,
you will need to rescan the following settings in order to gain access.
Astra 2D [28.2E]
10.847
V
DVB-S2 QPSK 23000
8/9
============================================
As of the [24 May 2011] I will be disconnecting the OpenBox S9, and will be running the Blade BM 7000 HD as my primary receiver, so I shall not be releasing any further channel lists, or making any more tutorials for the S9.
If anyone wishes to release their own multi-sat channel lists for the S9, then please feel free to do so.
Comment