Openbox s10 and Mgcamd

[darcu5]

Digary asked
When I turn the decoder on, it never says Cam loading or anything like that, should it??

---------------------------------------------------

No; it use to show on older firmware whilst booting up but it doesn't now.

[DW190]

Digary asked
When I turn the decoder on, it never says Cam loading or anything like that, should it??

---------------------------------------------------

No; it use to show on older firmware whilst booting up but it doesn't now.

No.

The only thing that shows when turning on is if you have a "USB device connected"

[tsakos3]

Hello,
i have buy one openbox s10, but i have the same problem with MgCamd, the same CW line (newcamed.list) is work perfectly on my Blackbox 500 (dreambox clone), what can i do for that?

[darcu5]

Try setting it up as an n line in CCcam... open notepad copy and paste your line (n blahdibla not cws=bladidla) and save it as CCcam.cfg.. put it into box and upgrade CCcam.cfg by usb, then go to manage cccam and select it (place a tick,) reboot and if it's gunna work then it shud show as online once rebooted. If it works this way then there shud be no reason for it not working as newcamd unless you are not imputting correct data in.

[tsakos3]

Try setting it up as an n line in CCcam... open notepad copy and paste your line (n blahdibla not cws=bladidla) and save it as CCcam.cfg.. put it into box and upgrade CCcam.cfg by usb, then go to manage cccam and select it (place a tick,) reboot and if it's gunna work then it shud show as online once rebooted. If it works this way then there shud be no reason for it not working as newcamd unless you are not imputting correct data in.

I have read your answers in forum, ihave make that with the n line and c line but nothing. Can i test if it connect right to the internet? I have make DHCP on, and i can see the ip on the modem!

[althom40]

Hi DW190 and Darcu5.
My firmware is 07-12-2011 I have found this version the best, so far.

This is what a N line looks like in my Manage newcamd list:---
3 CWS = server 12000 user1008. None of the deskey figures
appear on this list. Highlighting the file then saving and exiting
works ok but nothing after.

Putting an N line onto my usb and loading it into the CCcam.cfg
file looks ok. I have also added the 01 02-----14 entries at the end of the line, activating this but still does not come on line.

Now after clearing everything from CCcam.cfg then leaving only my attempts at NewcamD in the manage newcam list and whilst typing this the J*C sports has come on. About 8 minutes after the reboot.
I will experiment further and see whether I can get the N line to work in CCcam.cfg.
many thanks.

[darcu5]

This is what a N line looks like in my Manage newcamd list:---
3 CWS = server 12000 user1008. None of the deskey figures
appear on this list. Highlighting the file then saving and exiting
works ok but nothing after.

Thats correct m8, it wont shoew the deskey when you go back to check the mgcamd

i didnt know you were using mgcand on foreign (to me) sats, there were some replace key they use to have to imput on european stuff, i'll see if i can find them.

8 minutes to connect seems to be along long time

[darcu5]

just found this on here tnks to Opsmonkey http://www.digital-kaos.co.uk/forums...7/index15.html

if you go to post 221 you can get the zip file and try the following

replace.list for openbox S9 - Solves Sky DE and Canal+ FR HD issues

Click Menu ->
Network Local Settings ->
MGCamd Plug Settings ->
Update Files by USB-> replace.list [MGCamd Plug]

Now click either the OK or Green button to select
replace.list and place a check mark next to it, once the check mark or tick is visable
click the Yellow button to upload.

You can then if you wish, check to see if the replace list has been correctly added, by
clicking Manage Config Files and clicking on replace.list

If all went well, you will see the

following lines
X: {{ 1833 } { 1702 }}
X: {{ 1811 } { 0100 }}

[tsakos3]

I have read your answers in forum, ihave make that with the n line and c line but nothing. Can i test if it connect right to the internet? I have make DHCP on, and i can see the ip on the modem!

i have make firmware update (the last) i make the n line and its show online but its no playing...

[darcu5]

i have make firmware update (the last) i make the n line and its show online but its no playing...

Well at least your making progress Are you viewing correct channels

[tsakos3]

Well at least your making progress Are you viewing correct channels

yes i view the right channels

[althom40]

replace.list for openbox S9 - Solves Sky DE and Canal+ FR HD issues

If all went well, you will see the

following lines
X: {{ 1833 } { 1702 }}
X: {{ 1811 } { 0100 }}[/QUOTE]
================================================
Thanks Darcu5. Loaded that replace list file. Mostly working on HB @ 13E for J*C, Sly-It, Rai/Tivu all working but not N**a package.
===============================================
question: Can I use an active Cline in CCcam.cfg and also an active Newcamd line in the NewcamD list file?

regards

[darcu5]

yes you can

[tsakos3]

i have see on youtube when open a chanel its blink a green cccam on the chanel menu, to my openbox its not make

[mrsolli]

openbox S10 ccCam

I need step-by-step guide for installing cccam files on my openbox s10, anyone?