Open box s10 hd channels

[sevenoaks]

Recently set up my s10 hd and tested over the weekend through a recommended server. All went well, then I began to look through the hd channels I was picking up after I had completed the satellite scan. I seem to be missing s-y sp---s 2 and all the movie channels in high def, however I am getting these channels in standard definition.

I am getting some channels in hd but was wondering if there is any way of getting all the hd channels?

Appreciate any info / advice

[royboyz]

You mean they are not listed? Or they are but show no picture?

If its the first the OB has some incorrect transponder frequencies by default
Look on lyngsat 28.2e it shows the latest frequencys. Check they are on your list, if not add, scan & Viola
Have to then edit channel lists

[the man]

are you geting ss1 in hd? espn hd ? or just fta hd`s? then try the ch list ,

[sevenoaks]

Got the transponder info from Lyngsat, checked those against what was showing on the OB. Noticed a few differences and added / edited the box transponder info to suit. Then rescanned and still have the same channels (movie hd channels not showing)

I have checked through the tools menu, each transponder info, and there are quite a few transponders showing Signal Intensity at 45% and Signal Quality at 10%. The vast majority are showing Signal Intensity at 90% and Signal Quality at 75%.

A few of the low reading transponder details correspond with the HD channels as shown on the Lyngsat satellite info.

Is this just a coincidence or is there any way of increasing the Intensity and Quality of the transponder readings

[the man]

loads of s9/10 now are getting bad feedback , with bad tuners!!! just factory reset and re scan

[bobby1979]

loads of s9/10 now are getting bad feedback , with bad tuners!!! just factory reset and re scan

Hi if i factory reset do i lose all stuff that has been added ie cline bouquets etc cheers

[Im85288]

I'm having exactly the same problem on three s10 boxes. I tried using inline amps to boost the signal but still no difference.

Has anyone resolved this issue?

[thisnthat]

I'm having exactly the same problem on three s10 boxes. I tried using inline amps to boost the signal but still no difference.

Has anyone resolved this issue?

are they clones or original???

[Im85288]

are they clones or original???

Originals.. According to the supplier, they require a really strong signal.

[peterputki]

Same problem

are they clones or original???

I have exactly the same problem i have four lnbs thor 0.8 siruis4.8 astra 19.2 and 23,5 .
The 23.5 giving me lots of problems with hd channels.
I hope somebody will find a solution.
Friendly regards PEter

[smeghead007]

I am having the same problem. Thing is I can pick all the HD channels up in the morning and then by about 11.00 a.m they start to go and the SNR bounces from 0 to 76%

I have tried about 5 differrent frimwares and still no difference. Then about 11.00p.m. they come back !

I live in a block of flats and we use a communal dish that was only fitted 3 days ago. I'm hoping it's the dish and someone else complains as I can't really complain about it. I am wondering if it's because before 11.00 I am getting the stream and then other people start to power on their boxes and I lose some ?

[rio1]

there seems to be a fix with a diode inbetween the lnb and the box

[djrikstar]

Anyone know how to exactly fix this and what exactly causes it??

[jglo]

28e list sorted

28e channel list is sorted into favorates all working perfect

and channels not working let me know

http://www.digital-kaos.co.uk/forums/f184/28-2-e-sky-uk-channel-list-openboxe-s9-194832/index13.html#post1416848

[bindon100]

some info for you

Recently set up my s10 hd and tested over the weekend through a recommended server. All went well, then I began to look through the hd channels I was picking up after I had completed the satellite scan. I seem to be missing s-y sp---s 2 and all the movie channels in high def, however I am getting these channels in standard definition.

I am getting some channels in hd but was wondering if there is any way of getting all the hd channels?

Appreciate any info / advice

hi i had the same thing about 6 months ago happen to me i replaced the Lnb(dont think that done anything ) and replaced the cable from the Lnb to the box and i now have all channels in hd and normal hope this helps