problem searching channels

[jason6666]

Hi,

I have an openbox S10 and i have problems with my channellist.
I am using Editor Openbox_S9-HD as channel editor.

I've added in the sattelite information some providers like sky italy, MEO, c+nl etc.
I've also included all the TP's found in lyngsat.

After i upload the file into the openbox.
After i configure the sattelites with the right disec port.
Then i do a Multiple Satellite scan and select scanmode [Preset scan]
While searching i get all the time for example:
sky italy13e 11278V 27500...FAIL
No channels are found.

If i change the scanmode into [blindscan] then a lot of channels are found but exept the channels i've inserted the TP.

I attach my channellist, and please let me know what i am doing wrong.

[mdt]

Hi,

I have an openbox S10 and i have problems with my channellist.
I am using Editor Openbox_S9-HD as channel editor.

I've added in the sattelite information some providers like sky italy, MEO, c+nl etc.
I've also included all the TP's found in lyngsat.

After i upload the file into the openbox.
After i configure the sattelites with the right disec port.
Then i do a Multiple Satellite scan and select scanmode [Preset scan]
While searching i get all the time for example:
sky italy13e 11278V 27500...FAIL
No channels are found.

If i change the scanmode into [blindscan] then a lot of channels are found but exept the channels i've inserted the TP.

I attach my channellist, and please let me know what i am doing wrong.

if you are picking up channels using a blind scan but not a preset scan the check your diseqc port on your switch, regards mdt

[dluisi]

on the box go to

Menu > Installation > Transponder List > enter

Scroll through the list and find the TP that fails, and check details there, press red button to edit if needed. Then press OK on that TP and run a scan on 11278 ?

11278 is for polish channels and esp by the way.

[jason6666]

Thanks i will check that.
What is a more powerfull channel editor to use?