help with mllti sat set up

[ellesmere11]

i have just bought a s10 with a preloaded cline for astra 28e, which workds fine but how do i program mopre satsin to the box as when i go to sats it says 1 of 1 eurobird astra, and wont let me pick anny other sat to go to i am using dis 1.2

thanks

[darcu5]

i dont have a s10 i have the s9; but im lead to believe they are the same... have you been onto the satellite list and ticked the sats you want to scan?
And 1 use usals not disc1 or2

[ellesmere11]

set up multi sat help

when i go to sats it only shows wurobird 1 asdtra and in antena set up only offers 1 of 1 in sat menu.

[darcu5]

not 100% sure but i think you may have to install newer firmware then mate, should be quite a few sats on that list... someone will correct me if im wrong .
you can check on tools and info. which version you have

[nibblitz]

It sounds like whoever supplied you with the box set it all up for you, maybe they removed the other sats or loaded a channel list that doesnt have other sats in it.. If you want to add more satellites its easy, in the satellite list do the "add" function, enter position, give it a name, then in antenna setting for that satellite make sure the LNB is set to universal, and then the other settings depending on if you're using fixed dish, multi lnb, motorised..

[ellesmere11]

help setting up multi sat set up

yes the box came with a preloaded cline for astra,when i go to sat list and add it asks for a name and a long and lat number is there a list of info giving these numbers for 13e 1west and so on, is this the only info i need to find out if using dis 1.2.

thanks

[nibblitz]

Have you got a motorised dish? If you have, the Log & Lat that you put in is your log & lat for where you live... Then set all satellites to use USALS, thats the easiest way..

[ellesmere11]

help with mlti sat set up

i use a 1m motorised dish but only just started to use it again after a couple of years, is there some where to find the lat and long info i need for the other sats. like 13e 1west 30w and so on.

thanks

[nibblitz]

Like I said previously, you dont need log & lat for each satellite, the log & lat you enter (and only once) is your location, the satellite locations are simply 13e , 1w , 30w and so on.. USALS will drive your dish to point at them.. Entering your post code in at DishPointer.com will give you your log & lat if you dont already know it..