Can not get sky card working

[archers]

Hay guys I put firmware CHDS2-1105-20:08B5CM on my box as this is ment to run ok. But i cant get it to show up my sky tv when i go to sky 1 it comes up as scrambled. I have put my sky card in the openbox s10 I have put in what I belive is the wright Videoguard2 Box id hex. But my box shows my card up as CA system : Unknown I dont know whats going on anyone able to help me out with this as I dont know where im going wrong

thanks guys

[archers]

OK i got it working so silly I must say had the card the wrong way duhh. Any info how I can setup CS with my othere box IE keep my card in the living room and use my second box in the bedroom

[darcu5]

got this elsewhere, hope it helps you out


How to guide: Make a Openbox S9/S10 into a server


1. press menu
2. scroll down to Network Local Setting
3. press ok on remote
4.arrow right to Newcamd Server Settings
5. press ok on remote
6. enter newcamd server parameter
7 servversetting -ON-
8. TCP Port -eg. 13000- this MUST be forwarded in your router
9. Des Key 01020304055060708091011121314 Can be change to your own
10.add user in Newcamd server User manager with green button on remote
11. add username password allow emm yes
12. press yellow to save the configuration .

Now box is setup for server with 1 client and a reboot is always a good idea .

In the Client box with CCcam its the N: line to use for acces the server eg N: seerver_ip_or_dns Port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

[archers]

thanks m8 ill try it out in a bit thanks agine dude