I am trying to set up a s10 with a TM-2600 motor. I had to get a new motor as the old one died (used a 500s then). The motor has been set up and recieves 28.2 as per channel file I put on box. I have added 13.0 and 19.2 in the satellite list and activated them or ticked them. I have set the motor as diseq 1.2 on all satellites. I have then stored 13.0 and 19.2 in positions.
I have set LNB frequency to universal for both but cant get either to change transponder. The message No TP is there with no other options. The signal intensity is 44% and quality is 10% on both. I have tried moving manually in motor settings but there is no budge in signal strength. HELP!!!
Is it posible to upload via usb an image with correct motor settings?
I have set LNB frequency to universal for both but cant get either to change transponder. The message No TP is there with no other options. The signal intensity is 44% and quality is 10% on both. I have tried moving manually in motor settings but there is no budge in signal strength. HELP!!!
Is it posible to upload via usb an image with correct motor settings?
Comment