Satellite Searching - S9

[oziking]

I am really shocked to see the strange behavior of openbox 9
I have 4 Dishes connected AsiaSat 3s, PakSat 1, NileSat and IntelSat 10

Now if i am selecting only one dish e.g AsiaSat 3s to Blind Scan it starts searching for channels of PakSat as well !!!

Same is the case with IntelSat, if selected it searches for channels of IntelSat as well as NileSat ????

Cant it stick to the only Satellite i am requesting to search??

[darcu5]

Are you selecting to do a single sat scan, then changing it to the one you wish to scan? i dont have any problems on my s9 mate.

[oziking]

yes i am selecting one dish and selecting a single dish scan option and its still getting channels of PakSat instead of AsiaSat only
Can it happen due to a faulty DiseqC??

[darcu5]

i use usals on mine mate, so i dont really know, are the sats really close together, within a few degrees? and is the dish align and fine tuned correctly.. i once did a scan of brad 26e and it picked up 28.2e instead, but i put it down to the set up as i had my dish temporary stuck on the shed

[nibblitz]

I take it you have 4 seperate fixed satellite dish lnb feeds going into a 4x input diseqc switch.. Each satellite has its own port number in your settings on the box? yes?

[oziking]

@darcu5
yes that's my scenario